Brief introduction JNYQ-I-41 type infrared ray gas analysis instrument for continuous analysis of CO, CO2, SO2, CH4, NH3, etc. a variety of gas content in the mixture. The product is a full digital processing, in the indicators and functions are greatly improved. Products are widely used in the field, such as: chemical, petroleum, metallurgy and other industries, can also be used in environmental protection, agriculture, health and other departments, but also for scientific research, schools, laboratories. 1 for air and pollution sources emission detection; 2 industrial process control for petroleum, chemical, power plant, steel, coke, cement, etc.; 3 for agriculture, health and scientific research and other fields. Working principle JNYQ-I-41 type analysis instrument adopts the new type of infrared gas analyzer, which is designed and produced according to the principle of the German SIEMENS micro - flow technology. The working principle is based on the selective absorption of certain gases to the infrared. Features LCD large screen display, rich digital information; direct reading, automatic screen saver; Digital information processing; Measurement output linear expression; Manual / zero / finish calibration; Multiple status signal output: sound, light, picture, relay, communication information; All isolated state, current loop, RS232 digital communication output; Multi channel display optional configuration component: CO, CO2, SO2, CH4 and other gases; Temperature, sensitivity and interference can be digital compensation; Standard 483mm (19 inch cabinet) width, 4U height chassis; Technical parameter Measuring gases: CO, CO2, C2H2, C2H4, CH4, C2H6, biogas, SO2, NOX, SF6, NH3 (Optional) Main indicators: Zero Drift: ≤±1%FS/7d; Span drift: ≤±1%FS/7d; Linear error: ≤±1%FS; Signal output: (1) measuring output Large screen blue LCD, data reading, information rich; Humanized menu operation, concise and lively; Isolated current: (0/2/ ~ 20) mA (500Ω); Isolated communication: RS232; (2) state control output (isolation) Upper and lower limits of passive electric shock (adjustable); RS232 communication information; Working environment: power supply voltage: 220VAC±10%, 50Hz±5%; Ambient temperature: (5 ~ 40℃); Allowable humidity: (0 ~ 85)%RH; Work rate: 130W; Weight: about 13kg;
Brief introduction JNYQ-I-41 type infrared ray gas analysis instrument for continuous analysis of CO, CO2, SO2, CH4, NH3, etc. a variety of gas content in the mixture. The product is a full digital processing, in the indicators and functions are greatly improved. Products are widely used in the field, such as: chemical, petroleum, metallurgy and other industries, can also be used in environmental protection, agriculture, health and other departments, but also for scientific research, schools, laboratories. 1 for air and pollution sources emission detection; 2 industrial process control for petroleum, chemical, power plant, steel, coke, cement, etc.; 3 for agriculture, health and scientific research and other fields. Working principle JNYQ-I-41 type analysis instrument adopts the new type of infrared gas analyzer, which is designed and produced according to the principle of the German SIEMENS micro - flow technology. The working principle is based on the selective absorption of certain gases to the infrared.
