Jipad-24TLC dual mode water bath nitrogen blowing instrument Introduction: Sample concentration is a problem that every chemical laboratory involves. Previously, the main method of concentration was using a rotary evaporator, but the disadvantages of using a rotary evaporator for concentration were obvious: slow concentration speed, cumbersome operation, and especially not suitable for small amounts of samples. In this situation, nitrogen blowing instruments emerged, which not only solved all the shortcomings of using rotary evaporators, but also became a necessary instrument for every chemical laboratory, especially suitable for a small number of multiple samples. For samples that cannot be heated or even require cooling and concentration, a nitrogen blowing instrument can only be used for concentration. Our company independently develops, designs, and produces a nitrogen blowing instrument that uses blowing and trapping technology. At the same time, it can control the temperature and heat the sample, and use inert gases such as nitrogen to quickly, controllably, and continuously blow to the surface of the sample to achieve rapid oxygen free concentration of the sample solution. This method has the characteristics of time saving, convenience, and accuracy. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc. Technical parameters: Model: Jipad-24TLC Number of samples processed: 24 independent controls (supports customization) Heating method: water bath heating Temperature range: room temperature -100 ℃ Temperature control accuracy: ± 0.5 ℃ Set time: 1-9999min Liquid shortage sound and light alarm: supported Control method: 5-inch high-definition color touch screen Control mode: manual and automatic dual modes Editable program: 1-30 segments Concentration tube size range: Ø 10-35mm, H32-200mm (supports customization) Sample holder height adjustable: supported Gas input pressure: 0.2-1.0MPa Gas output pressure: 0.2-0.8MPa Needle lifting height: 0-200mm Needle blowing lifting method: one click lifting Drainage method: quick insertion type Group control: 6, 12, 18, 24 channels One click shut-off valve: supported Power: 2000W
Introduction: Sample concentration is a problem that every chemical laboratory involves. Previously, the main method of concentration was using a rotary evaporator, but the disadvantages of using a rotary evaporator for concentration were obvious: slow concentration speed, cumbersome operation, and especially not suitable for small amounts of samples. In this situation, nitrogen blowing instruments emerged, which not only solved all the shortcomings of using rotary evaporators, but also became a necessary instrument for every chemical laboratory, especially suitable for a small number of multiple samples. For samples that cannot be heated or even require cooling and concentration, a nitrogen blowing instrument can only be used for concentration. Our company independently develops, designs, and produces a nitrogen blowing instrument that uses blowing and trapping technology. At the same time, it can control the temperature and heat the sample, and use inert gases such as nitrogen to quickly, controllably, and continuously blow to the surface of the sample to achieve rapid oxygen free concentration of the sample solution. This method has the characteristics of time saving, convenience, and accuracy. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc.
