Position: Home > > Industry specific instrument > Oil special analytical instrument > Lubricating oil detection > JF0060 Automatic Antirust Grease Oxygen Absorption Tester for grease

JF0060 Automatic Antirust Grease Oxygen Absorption Tester for grease

Product ID:HZSYrhy041

US$0.00 ~ US$1.00 PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberJF0060
    Brand NameHUNANJIAFA
    Payment TermsTT,PAYPAL
    JF0060 Automatic Antirust Grease Oxygen Absorption Tester
      
    Introduction:
    The operating principle of this instrument is very simple: put the sample into an oxygen bomb that meets certain conditions for oxidation, observe and record the pressure at specified time intervals. The degree of oxygen uptake of the sample is indicated by the corresponding decrease in oxygen pressure after 100 h. The instrument is suitable for anti-rust grease and anti-rust grease.
    Features:
    1. Standard brass small circular plate Φ33×1.2mm;
    2. The entire test process is automatically controlled by a single-chip microcomputer, and no manual conduct is required;
    3. The test process is displayed in real time with a curve on the LCD screen, and the results are clear at a glance;
    4. Two tests can be done at the same time, which is convenient for parallel samples, and the test results are automatically stored;
    5. Automatically detect oxygen bomb pressure leakage and alarm;
    6. The high-precision pressure transmitter converts the pressure signal, and the number is displayed on the LCD screen;
    7. Stainless steel heater, heating bath;
    8. The instrument has an automatic correction function and can be repaired online;
    9. A variety of thermal insulation materials are used for thermal insulation to avoid scalding staff;
    10. A single sample dish rack can hold 5 sample dishes;
    Technical parameter:
    Applicable standard: JISK2246 SH/T0060
    Heating method: electric heating tube heating
    Machine power: 2.5KW
    Control mode: single-chip automatic control
    Timing method: automatic recording by single-chip microcomputer
    Result processing: automatic recording and storage of results
    Pressure display: LCD screen displays real-time curve
    Working power supply: AC220V/50HZ
  • Introduction:
    The operating principle of this instrument is very simple: put the sample into an oxygen bomb that meets certain conditions for oxidation, observe and record the pressure at specified time intervals. The degree of oxygen uptake of the sample is indicated by the corresponding decrease in oxygen pressure after 100 h. The instrument is suitable for anti-rust grease and anti-rust grease.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com