HY106 Personal Sound Exposure Meter Introduction: The HY106 Personal Sound Exposure Meter (also known as a Personal Noise Dosimeter) is a Class 2 precision, pocket-sized, fully digital occupational noise measuring instrument produced by our company. It is specifically designed for individual workers to wear, and is used to assess noise exposure and the risk of hearing damage. It is suitable for use in high-noise environments such as industries, mines, and construction sites, for occupational health evaluation and individual noise monitoring. Features: 1. Personal noise dosimeter 2. Pocket-sized fully digital sound level meter 3. Octave and third-octave analyzers (optional) 4. Time-weighted average sound level meter 5. It is applicable to noise measurement in workplaces and occupational health noise assessment, as well as to the measurement and analysis of environmental noise and machine noise 6. Explosion-proof products are available, with explosion-proof marks: Ex ia I Ma and Ex ia IIb T4 Ga 7. A power bank can be used for power supply 8. Optional recording and Bluetooth functions Technical Specifications: Performance level: Equivalent to a Class 2 sound level meter that meets the requirements of GB/T 3785.1-2023. Measured evaluation parameters: LP, Leq, LE, Leq,1s, L5, L10, L50, L90, L95, Lmax, Lmin, LCpeak, Leq8h, Dose, EA, SD, NLpeak, Lav, TWA, Dnee, Enee, LEnee, and other parameters. Transducer: HY205 Type 2-level engineering measurement microphone, with a nominal diameter of 12.7 mm and a free-field frequency response. The nominal sound pressure sensitivity is 40 mV/Pa (nominal sound pressure sensitivity level is -28 dB, with a reference value of 1 V). When calibrated with a sound calibrator, the self-sound field correction value is 0.2 dB at a calibration frequency of 1 kHz. Frequency range: 20 Hz to 12.5 kHz. Frequency weighting: A weighting, C weighting, Z weighting. Time weighting: F (fast response), S (slow response), I (impulse response). Measurement range: A-weighted sound pressure level: 30 dB to 130 dB; C-weighted sound pressure level: 40 dB to 130 dB; Z-weighted sound pressure level: 45 dB to 130 dB. Sampling frequency: 48 kHz. Display: 0.96-inch OLED display with a resolution of 128×64 and a resolution power of 0.1dB, featuring indicators for overload, out-of-range, and low battery voltage alarms. Power Supply: Equipped with a built-in 3.7 V lithium battery, it can operate continuously for at least 25 hours under reference environmental conditions. Additionally, it supports external power supply. Instrument power: not greater than 0.5W. Overall dimensions: length × width × thickness 105 mm × 52 mm × 33 mm. Weight: 220 g. Shell material: PC flame-retardant and anti-static material. Operating temperature range: 0℃~40℃.
HY106 Personal Sound Exposure Meter Introduction: The HY106 Personal Sound Exposure Meter (also known as a Personal Noise Dosimeter) is a Class 2 precision, pocket-sized, fully digital occupational noise measuring instrument produced by our company. It is specifically designed for individual workers to wear, and is used to assess noise exposure and the risk of hearing damage. It is suitable for use in high-noise environments such as industries, mines, and construction sites, for occupational health evaluation and individual noise monitoring.