HY-SA2 Series Ultrasonic Wind Speed and Direction Meter Introduction: The HY-SA2 series anemometer utilizes the ultrasonic resonance method to measure wind speed and direction. The HY-SA2 series is an ultrasonic anemometer with a compact size and very light weight on the market, with a diameter of only 43mm and a weight of just 130g. It employs a low-power consumption chip internally, consuming only 0.1W when in low power consumption mode. This series of ultrasonic anemometers has been designed with multiple installation methods and three types of housing materials to cater to different usage environments and meet users' individual needs. The housing materials include ABS, aluminum alloy, and stainless steel, all of which have undergone special oxidation-resistant treatment to ensure corrosion resistance. The installation methods include vertical, hoisting, and horizontal installation. The protection level can be increased to IP68 to adapt to use in harsh marine environments. Application sites: Primarily used in meteorological stations, high-voltage towers, communication towers, specialized ventilation ducts, and offshore buoys. Technical Specifications: Model: HY-SA2 Overall dimensions/weight: Φ50×60mm / 0.28kg (aluminum alloy) Material/Color: Aluminum alloy/Black Wind speed measurement range/accuracy/resolution: 0 - 60m/s / ±3% / 0.1m/s Wind direction measurement range/accuracy/resolution: 0 - 359° / ±3° / 1° Digital output: RS485, SDI-12 (choose one) Communication baud rate: 4800 - 19200 Communication protocols: ModBus, ASCII, NMEA-0183 Protection level: IP65 (up to IP68) Operating temperature/humidity: -40℃ to +60℃; 0 to 100% Power Supply Requirements: VDC: 5-30V Power consumption: 0.1W (Min)
HY-SA2 Series Ultrasonic Wind Speed and Direction Meter Introduction: The HY-SA2 series anemometer utilizes the ultrasonic resonance method to measure wind speed and direction. The HY-SA2 series is an ultrasonic anemometer with a compact size and very light weight on the market, with a diameter of only 43mm and a weight of just 130g. It employs a low-power consumption chip internally, consuming only 0.1W when in low power consumption mode. This series of ultrasonic anemometers has been designed with multiple installation methods and three types of housing materials to cater to different usage environments and meet users' individual needs. The housing materials include ABS, aluminum alloy, and stainless steel, all of which have undergone special oxidation-resistant treatment to ensure corrosion resistance. The installation methods include vertical, hoisting, and horizontal installation. The protection level can be increased to IP68 to adapt to use in harsh marine environments. Application sites: Primarily used in meteorological stations, high-voltage towers, communication towers, specialized ventilation ducts, and offshore buoys.