Product introduction: Hangzhou hotelling biological technology co., LTD. Is devoted to the development of the isolation technique and applied research in pharmaceutical industry, from the QC department of sterile test, biological safety protection, and production with isolator technology (aseptic packing, weighing, ingredients, crushing, sampling, etc.) with RABS, we can provide a variety of isolator for product sterile protection or toxic containment to provide comprehensive technical solutions. The newly introduced QC and r&d laboratory sterile screening isolator is almost suitable for aseptic preparations and aseptic raw materials (API) aseptic testing based on pharmacopoeia statutory methods (membrane filtration and direct inoculation). Performance features: 1. Hard wall structure composed of stainless steel and tempered glass, with dynamic class A internal environment; 2. Operate with gloves. The gloves can be thickened to resist damage or thin superior type; 3. Select the H14 high-efficiency filter and pass the PAO scan leak test; 4. The system reserved the interface and valve connected with the hydrogen peroxide (VHP) generator, which can be selected for high level disinfection by hydrogen peroxide steam generator. Hydrogen peroxide can have the killing effect of 106 spores on the air in the isolator and the exposed surface; 5. The safe entry and exit of articles can be realized in various ways, such as air lock chamber, transfer chamber with RTP system, etc.; 6. The internal power supply can be installed in the isolator, and the compressed air joint and cleaning water joint with valve can also be installed for water inlet and air inlet. 7. The system is equipped with Siemens logic controller (PLC) for fully automatic control of pressure and air supply, and has the function of anti-pressure alarm; 8. With casters and locks, movable and fixed. Technical parameters: 1. Power supply voltage: 380V + / 38V, 50 + / 1Hz (hty-1800g4, hty-1800ag4); 220V plus or minus 22V, 50 plus or minus 1Hz (hty-1250g2); 2. Maximum power of equipment: less than or equal to 4000W (hty-1800g4, hty-1800ag4); Less than or equal to 3000W (hty-1250g2); 3. Touch screen size: 7 inches; 4. Pressure control range in cabin: -80 ~ 80Pa range is adjustable; 5. Humidity resolution: 0.1%; 6. The temperature resolution: 0.1 ℃; 7. Pressure resolution: 0.1pa; 8. Air flow model in the compartment of isolator: vertical one-way flow; 9. Wind speed: 0.36 ~ 0.54m/s; 10. Hull leakage rate: pressure retention test was conducted when the positive pressure was 60Pa. The overall leakage rate of the isolator cabin was less than 0.5% vol/hour; 11. Air source: filtered clean compressed air or nitrogen, air source pressure 0.4-0.6mpa; 12. Basic dimensions: Hull size (L x W x H) :1250 x 650 x 670 External dimensions (L x W x H) : 1250 x 1100 x 2300 Application area: Purpose: aseptic testing, positive bacteria testing, sampling, weighing and packing of highly sensitive and active materials, protecting both the materials and the operators.
Product introduction: Hangzhou hotelling biological technology co., LTD. Is devoted to the development of the isolation technique and applied research in pharmaceutical industry, from the QC department of sterile test, biological safety protection, and production with isolator technology (aseptic packing, weighing, ingredients, crushing, sampling, etc.) with RABS, we can provide a variety of isolator for product sterile protection or toxic containment to provide comprehensive technical solutions. The newly introduced QC and r&d laboratory sterile screening isolator is almost suitable for aseptic preparations and aseptic raw materials (API) aseptic testing based on pharmacopoeia statutory methods (membrane filtration and direct inoculation).
