Introduction: HTD-6S digital display six-speed rotational viscometer is a rotational viscometer designed by our company. This type of viscometer adopts embedded structure design, built-in angle sensor, adopts stepper motor drive, and the rotation speed is more stable; the panel keys are clearly marked and easy to operate, and the high-resolution LCD display can display the viscosity value of the test liquid and the stirring speed in real time. working principle: Place the slurry cup containing the liquid to be measured on the tray, and the liquid to be measured enters the annular space (shear gap) formed between the outer sleeve of the viscometer and the float. When the stepping motor drives the outer sleeve to rotate, the sleeve The cylinder is subjected to viscous resistance in the liquid to be tested and generates a reaction force, which will generate torque to the float in the sleeve through the liquid to be tested in the annular space, and the float is connected with a set of scale components. When the resistance reaches a balance, the dial assembly will stabilize at a certain scale value. Since the scale value is proportional to the viscous resistance of the sleeve, the final viscosity value can be obtained by multiplying the scale value by a specific coefficient. Also displayed on the LCD screen for easy reading. Technical parameter: Power supply: AC110/220V±5% 50/60Hz Motor power: 40W Ambient temperature: ≥20±5℃ Ambient humidity: 45%RH～60%RH Motor speed: 720 r/min Speed range: 3, 6, 100, 200, 300, 600r/min Measurement accuracy: ±0.5 mPa.s (Newtonian fluid) Viscosity measurement range: Newtonian fluid: 0～300mPa.s (F1 measuring component) 0～60mPa.s (F0.2 measuring unit) Non-Newtonian fluid: 0 to 150 mPa.s (F1 measuring unit) 0～30 mPa.s (F0.2 measuring unit) Shear stress: 0～153.3Pa (F1 measuring unit) 0～30.7Pa (F0.2 measuring unit)
Introduction: HTD-6S digital display six-speed rotational viscometer is a rotational viscometer designed by our company. This type of viscometer adopts embedded structure design, built-in angle sensor, adopts stepper motor drive, and the rotation speed is more stable; the panel keys are clearly marked and easy to operate, and the high-resolution LCD display can display the viscosity value of the test liquid and the stirring speed in real time.
