Brief introduction: HD269 grease cone penetration tester is designed and manufactured according to national standard GB/T269 "grease and oil cone penetration test method" and ISO2137 "grease and oil cone penetration test method". It is suitable for testing various grease and oil cone penetration test. Method summary: at 25 degrees, the standard cone with a load of 150 grams moves vertically without obvious friction and sinks into the depth of grease or oil grease within 5 seconds, which is called the degree of cone penetration of grease or oil grease, in order to identify the degree of softness of grease or oil grease. Instrument features: 1. The design of the instrument conforms to the requirements of cone penetration test in Chinese pharmacopoeia. 2, MCU program automatically control the cone fall, 5 seconds automatic timing and locking the digital ruler. 3, the use of LCD digital zero percent mm ruler type depth measurement mechanism, directly show the depth of falling. 4. It conforms to the test performance specified in gb1790-2003 pharmaceutical petroleum jelly standard. 5. Set fine-tuning anchor screws, which can be used to adjust the level of the base table. 6. The bracket has two speeds of coarse movement and micro movement, so that the tip of the cone can be easily aligned with the surface of the sample during the test. Technical parameters: 1. Working power supply: AC220V 10% 50Hz 2. Measuring range: 0 ~ 600 taper units 3. Digital caliper: 0 ~ 100mm 4. Display accuracy: 0.01mm 5. Minimum reading: 0.1 taper unit 6. Timing range: 5 seconds or 60S 7. Observation light source: with LED light source 8, working device: standard with full size, the rest optional (1) full size work unit trip 71 mm standard containers Φ 100 * 65 (mm) (2) 1/2 scale work is 35 mm smaller container size schedule for the Φ 38.1 x 38.2 (mm) (3) a quarter percentage work device 14 mm and the container size schedule for Φ 19 x 17.5 (mm) Measuring cone: standard with full size, others optional (1) full size cone mass 102.5 0.05g cone rod mass 47.5 0.05g (2)The 1/2 ratio vertebral body mass is 37.5 0.05g, and the 1/2 cone rod mass is 15 0.025g (3)The total mass of 1/4 ratio cone and rod is 9.38 0.025g
Brief introduction: HD269 grease cone penetration tester is designed and manufactured according to national standard GB/T269 "grease and oil cone penetration test method" and ISO2137 "grease and oil cone penetration test method". It is suitable for testing various grease and oil cone penetration test. Method summary: at 25 degrees, the standard cone with a load of 150 grams moves vertically without obvious friction and sinks into the depth of grease or oil grease within 5 seconds, which is called the degree of cone penetration of grease or oil grease, in order to identify the degree of softness of grease or oil grease.
