Introduction: The empty box compression testing machine is a direct test instrument for testing the compressive strength of the carton or other packaging containers. It is used to determine the pressure resistance of the carton and can be used for the test of the pressure stacking. The test results can be used as a finished product packaging box. A highly important reference or an important basis for designing a package. Empty box compression testing machine design standards: TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642, QB/T1048, BS EN ISO 12048, GB/T4857.16, GB/T8167, GB/T8168, GB/T4857.3, GB/T4857.4 Four points to note about the operation: 1, test power Please pay attention to the following items regarding the power supply of this device. In principle, the power distribution method uses a three-phase 220V grounded power supply. For power and power engineering, please consult with electrical engineers or people with equivalent knowledge. 2, power cord Be sure to use the power cord supplied with your device. If you find any abnormalities in the power cord and power plug, contact the manufacturer. Replace or instruct to replace with the manufacturer. 3, the fuse In order to prevent fire and damage to internal circuits, do not use fuses other than those specified. When replacing the fuse, use a fuse of the same type and shape as the original device. 4. Warning: Warnings should be noted that the application or conditions carried out are highly dangerous and may result in personal injury or even death. Technical parameters: (can be customized according to customer requirements) Allowable test piece weight: 2T Degree of decomposition: 1/10,000 Accuracy: ≤0.5% Power unit: KG, LB, N can be switched Report items: serial number, peak value, average value, set pressure value, memory safety device: overload protection, overvoltage protection, limit protection device Structure: Taiwan AC variable frequency motor, ordinary screw Compressed space: 1000×1200×1200 Compression speed standard: 10±3mm/min Dimensions: (L × W × H) 2000 × 1200 × 2030mm Weight - host: about 730kg Power source: 220v/50Hz
The empty box compression testing machine is a direct test instrument for testing the compressive strength of the carton or other packaging containers. It is used to determine the pressure resistance of the carton and can be used for the test of the pressure stacking. The test results can be used as a finished product packaging box. A highly important reference or an important basis for designing a package. Empty box compression testing machine design standards: TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642, QB/T1048, BS EN ISO 12048, GB/T4857.16, GB/T8167, GB/T8168, GB/T4857.3, GB/T4857.4