GX-6030-B side pressure strength testing machine Introduction: The machine is sensed by high-precision sensor, and the strength of the sample is numerically displayed by software analysis. It is used for corrugated core paper and kraft paper with thickness less than 1mm in a ring-shaped container, and the machine is tested for its resistance in the upright direction. Compressive strength, used with a variety of accessories, and can test the vertical strength of the board, bonding strength and flat strength. Compliance with standards: The design of this instrument meets the requirements of JIS, GB and other standards. Technical Parameters: Induction method: LOAD CELL power sensor Capacity: 200KG Unit switching: Kg/N/Lb Resolution: 1/10000 Accuracy: ±1% Pressure plate: 100 × 100 mm or depending on the diameter of the flat sample Ring pressure sample: 152 × 12.7mm Side pressure sample: 100 × 25 mm Test speed: 12.7 mm/min (national standard) Effective spacing: 420 mm Volume: 76×40×90mm Control box size: 210 × 140 × 290mm Power source: 1∮, 220V 1.5A (in accordance with national standard or designated) Weight (approx.): 40kg Standard configuration: One test machine host; A set of side pressure guide blocks.
