Brief introduction: The multi-parameter monitor adopts imported original TFT high-brightness real color LCD screen with clear and intuitive interface, small volume and light weight. For adult and children are applicable, can be continuously at the same time for the patient electrocardiogram (ecg) and heart rate, noninvasive blood pressure (systolic pressure, diastolic pressure and mean arterial pressure), blood oxygen saturation, breathing, monitoring of vital signs parameters such as temperature, with screen display of ecg waveform, blood oxygen waveform, breathing waveform, blood pressure measurement, oxygen measurement data, heart rate, breathing rate, body temperature and other kinds of parameters, for ecg and blood oxygen waveform can realize waveform data playback, also has the function of displaying tables and graphics trend CO2 at the end of the function. Performance features: 1. The monitor adopts the world famous brand module. High precision. The parameters are accurate. Reliable quality and stable performance 2. High brightness and resolution 12.1 inch color TFT LCD display. The data waveform is clear and easy to see 3. Operation mode of rotating shuttle. Bilingual operation interface in Chinese and English. Easy to learn. Easy to use, easy to operate 4. Full-lead seven-channel synchronous display of ecg 5. Five-minute playback of ecg waveform and automatic ST segment detection 6. Time trend data memory and dynamic waveform capture 7. The upper and lower limits of alarm can be set at will, and the automatic acoustooptic dual alarm can be set 8. Applicable to adults, children and newborns 9. Anti-defibrillation and anti-interference of high-frequency electrotome 10. Remote wired central monitoring network interface 11. Optional plug-in lithium battery. Alternating current and direct current 2 12. The built-in two-channel thermal array recorder can be optional to print waveforms and charts in real time 13. It is widely used in internal medicine, surgery, operating room, obstetrics and gynecology, pediatrics, emergency center, ICU and CCU 14. Printer (optional) : two-channel thermal array recorder. Printing: real - time or event trigger recording waveform, text. Note: name, gender, date (year/month/day)/time (24 hours) 15. Power supply: single external ac power supply 220V, 50Hz, maximum current 1A. Built-in battery: fully sealed and no maintenance for large capacity lithium battery. Power consumption: not greater than 70VA. Safety standards: comply with iec6060601-1, UL2601 medical international safety standards 16. Function of CO2 at the end of breath Technical parameters (eight parameters) : 1. ECG/ ECG Lead: lead all, Ⅰ, Ⅱ, Ⅲ, aVF, aVR, aVL, V1-6 lead thoracic display ST segment detection: measurement range (-2.0mV ~ +2.0mV) 2, heart rate, Adult: 15-300bpm (fight/score) Newborns/children: 15-350 BPM (stroke/point) Alarm mode: acoustooptic alarm 3. RESP/ respiration Respiratory measurement range: Adult: 7 ~ 120BrPM (times/points) Children and newborns: 7 ~ 150 BrPM(second/point) Alarm preset range: alarm over preset value The upper limit is 10 to 100 times/min The lower limit is adjustable from 0 to 99 times/min 4. NIBP/ blood pressure Technology: oscillography (pulse wave oscillation) Working mode: manual/automatic Measurement unit: mmHg/Kpa Overpressure protection: double safety protection 5. SPO2/ oxygen saturation Range: 70 ~ 100% Alarm preset range and error :(alarm over preset value) Upper limit 20% ~ 100% Lower limit 10% ~ 99% 6, pulse 20 ~ 300 times/min Alarm mode: acoustooptic alarm 7. TEMP/ body temperature Technology: high sensitive thermistor probe Temperature measurement range: 0 ℃ ~ 45 ℃ 8. Exhaled CO2 The side-flow optical sensor (inlet) is placed in the monitoring instrument, and the gas sampling tube extracts the patient's respiratory gas into the monitor in real time for concentration analysis. The air - water separator removes moisture from the breathing gas. Always check whether the gas and water separator is blocked, otherwise the moisture and dirt in the gas will affect the accuracy of measurement and increase the working noise.
