GIT-MINI02 Glove Integrity Tester Introduction: The GIT-MINI02 Glove Integrity Tester is a specialized instrument designed to test the integrity of isolators/RABS system sleeves/gloves or integrated gloves. The glove integrity tester features an intelligent integrated control and display, and comes with a test port that matches the isolator's operating port. The tester can operate in positive pressure mode, eliminating the need for manual operation by the operator. The display screen automatically displays the test results throughout the entire process, allowing for the determination of the seal integrity of the tested gloves. Features: 1. The detection process is performed online, without the need to disassemble the cuff/glove. 2. With an ingenious structure and a portable design, it is convenient to use. 3. Battery-powered design, no external power supply required. 4. The tester integrates an internal air supply device, eliminating the need for an external air source. 5. Controlled by a single-chip microcomputer, 4.3-inch touch screen display. 6. It has a good human-computer interaction interface, which is convenient for observation and operation. 7. Used for integrity testing of sleeves/gloves before or after use in isolators. 8. Developed in accordance with ISO14644-7 standard. 9. Fully automated monitoring of pressure within the inflatable sealing ring and gloves during the testing process; 10. It features a variety of formula options to meet diverse glove testing needs; 11. Glove number identification: RFID chip; 12. Support three-level operation permissions; Technical Specifications: Test port specification: Ф255mm (other specifications can be customized) Input pressure: > 0.2 MPa Inflation pressure: 500Pa~2500Pa Test duration: 3 minutes to 8 minutes Pressure display resolution: 0.1 Pa Detection accuracy (minimum aperture): 300μm; Instrument weight: approximately 2.5kg Overall dimensions: 260mm×280mm×125mm Power supply battery: lithium battery Charging time: 4 hours; Power: ≤20W Continuous working time: ≥4 hours; Data processing methods: Online micro-typing, USB export; Storage data: 10,000 sets;
GIT-MINI02 Glove Integrity Tester Introduction: The GIT-MINI02 Glove Integrity Tester is a specialized instrument designed to test the integrity of isolators/RABS system sleeves/gloves or integrated gloves. The glove integrity tester features an intelligent integrated control and display, and comes with a test port that matches the isolator's operating port. The tester can operate in positive pressure mode, eliminating the need for manual operation by the operator. The display screen automatically displays the test results throughout the entire process, allowing for the determination of the seal integrity of the tested gloves.
