GGS4 Quadruple High Temperature and High Pressure Water Loss Apparatus
Introduction: The quadruple high temperature and high pressure water loss instrument can perform four parallel sample experiments. Four groups of samples at the same temperature and pressure can start the water loss experiment at the same time to reduce the error of multiple experiments. Shorten the experiment time. The four sample cups can be used for comparative experiments under the same experimental conditions at the same time, or asynchronous experiments for different samples and different experimental environments. According to the American (API) recommended procedure, the instrument is suitable for the temperature range from normal temperature to 150℃. The maximum working pressure in the drilling fluid test cup is 4.2MPa. Under the action of the filtration pressure difference of 3.5MPa, the filtration area is 22.6 MPa in 30 minutes. cm2 to obtain important data such as static filtration volume and filter cake formed after filtration under high temperature and high pressure conditions. technical parameter: Power supply: 220V±5% 50Hz Power: 1600W Working temperature: normal temperature to 150℃ Mud Cup Capacity: 0.17 Working pressure of drilling fluid cup: 4.2MPa Back pressure device input pressure: 0.69MPa Effective water loss area: 22.6cm2 Drilling fluid cup limit pressure: 8 MPa Gas source: nitrogen, carbon dioxide gas (excluding impurities such as oil and water)
Introduction: The quadruple high temperature and high pressure water loss instrument can perform four parallel sample experiments. Four groups of samples at the same temperature and pressure can start the water loss experiment at the same time to reduce the error of multiple experiments. Shorten the experiment time. The four sample cups can be used for comparative experiments under the same experimental conditions at the same time, or asynchronous experiments for different samples and different experimental environments. According to the American (API) recommended procedure, the instrument is suitable for the temperature range from normal temperature to 150℃. The maximum working pressure in the drilling fluid test cup is 4.2MPa. Under the action of the filtration pressure difference of 3.5MPa, the filtration area is 22.6 MPa in 30 minutes. cm2 to obtain important data such as static filtration volume and filter cake formed after filtration under high temperature and high pressure conditions.
