Brief introduction: The product is our company many years of manufacturing experience and in the original old models (GBS - 60 a) on the basis of the generation of new product development, production, its main characteristic is cup drawing value of accuracy to 0.01 mm, the main loading test force control measurement precision is improved by 1 n, in addition, the main test force loading for rate control, etc. We are in the oil cylinder, manual valve torque, on the basis of servo control and constant loading rate, thus greatly improve the control precision of the machine; Electric control instead of manual hydraulic loading for mechanical load; Hub-and-spoke instead of hydraulic pressure sensor for sensors, improve the test precision of the main test force and control accuracy, the bursting of the sample at the same time we also choose the high-precision encoder to measure cupping values, from the test accuracy, can guarantee the accuracy of two decimal places, we also in appearance, has carried on the big, has changed the original coarse old heavy equipment, plastic spraying outside for the whole, the overall appearance neat and easy, give a person the first good perceptual knowledge. Technical parameters: Plate thickness: 0.05 ~ 2 mm (sensor has high precision, ultra-thin plate test) can be realized Plate width: 90-100 - mm; The punch stroke, 40 mm; Stepping up 40 mm piston stroke. Stamping 100 knmax load. The biggest clamping load 20 kn. Cup drawing value resolution: 0.01 mm Cup drawing test mould specifications: Standard blunt header: phi 20 + / - 0.05 mm Standard gasket die aperture: phi 33 + / - 0.1 mm Standard fixed die aperture: phi 27 + / - 0.05 mm Special orders can provide non-standard mould. To conform to the American standard, European standard and other international standards of cup drawing machine. Hydraulic oil: N46 hydraulic oil (general gas station can be bought). Dimension: 700 * 360 * 360 (mm) Power： AC380V. Weight： 500 kg.
Brief introduction: The product is our company many years of manufacturing experience and in the original old models (GBS - 60 a) on the basis of the generation of new product development, production, its main characteristic is cup drawing value of accuracy to 0.01 mm, the main loading test force control measurement precision is improved by 1 n, in addition, the main test force loading for rate control, etc. We are in the oil cylinder, manual valve torque, on the basis of servo control and constant loading rate, thus greatly improve the control precision of the machine;
