FY-20L glass separator Introduction: The electric constant speed mixing system of this machine uniformly mixes the raw materials in the kettle, allowing the materials to fully react in the kettle. After the reaction is completed, the mixing system is closed, and after the materials are clarified and layered, the liquid is discharged layer by layer through the glass discharge valve. characteristic: 1. The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene material, which have stable performance and are not easy to react with the material. 2. The frame type body is made of aluminum alloy and stainless steel material. 3. Glass+PTFE discharge valve, no liquid accumulation side discharge. 4. Low speed booster motor, electronic stepless speed regulation, fine adjustment through rotary knob, and speed digital display. 5. The mixing system adopts ceramic bearings and mechanical seals to prevent the mixing rod from being worn and chipped. 6. Crescent type stirring paddle, 304 stainless steel+polytetrafluoroethylene stirring blade; The mixing rod is made of 304 stainless steel and wrapped in polytetrafluoroethylene pipes. 7. The bottom of the machine is equipped with a universal wheel with brakes, which can be moved as a whole and is easy to operate. 8. Fuse safety protection. Technical parameters: Model: FY-20L Capacity: 20L spherical Voltage frequency: 220V/50HZ Motor power: 90W1/3 Speed: 0-450rpm/min Vacuum degree: 0.098Mpa Kettle body（ Φ 355m (four ports): Mixing port: Φ 80mm flange port Feeding port: 34 # standard port Pressure reducing port: 34 # standard port Discharge port: Φ 80mm flange port Stirring paddle: Φ seventeen × 650H (mm) blade span 190mm Feeding valve: 34 # standard plug valve, feeding nozzle (pagoda joint), outer diameter 12mm Pressure reducing valve: 34 # standard plug valve vent nozzle (pagoda joint) with an outer diameter of 12mm Discharge port: Φ 80mm flange Φ 33mm discharge hole inclined discharge port (pagoda joint) Φ 34mm above ground 350mm Overall space size: 530 × four hundred and forty × 1580mm wide, deep, and high Machine net weight: 33KG Packaging size: 1280 × five hundred and sixty × 580mm wooden box 0.42m3 Packaging weight: 54KG
Introduction: The electric constant speed mixing system of this machine uniformly mixes the raw materials in the kettle, allowing the materials to fully react in the kettle. After the reaction is completed, the mixing system is closed, and after the materials are clarified and layered, the liquid is discharged layer by layer through the glass discharge valve.
