Position: Home > > Physical property test > Surface physical property test > WBother > FT - 300 series powder resistivity tester for Carbon powder detection

FT - 300 series powder resistivity tester for Carbon powder detection

Product ID:WBoth010

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberFT - 300
    Brand NameYM
    Payment TermsT/T, paypal
    Brief introduction:
    The instrument adopts the method of four terminal is suitable for use in carbon powder plant, coking plant, petrochemical plant, powder metallurgy factory, institutions of higher learning, scientific research department, quality inspection and analysis of powder sample is an important tool. This instrument adopts the 4.3 -inch LCD screen display, also showed resistance, resistivity, sheet resistance, electrical conductivity value, temperature, pressure, automatic conversion unit, configure different test fixture can meet the test requirements of different materials. Test fixture can choose according to the product and the test project requirement. Use membrane switches panel, the operation is simple, durable, accord with human body engineering practice.
    Technical indicators:
    Resistance: 10-7 ~ 2 x 107 Ω
    The resistivity range: 10-8 ~ 2 x 107 Ω - cm
    Electrical conductivity: 5 x 10-7 ~ 107 s/cm
    Test current range: 1 mu A, 10 mu, 100 mu A, 1 ma, 10 ma, 100 ma, ma, 1000
    Measure the voltage range: measure the voltage range: 2 mv 20 mv 200 mv 2 v measurement precision plus or minus 0.1% (reading)
    Resolution: 0.1 uV 1 uV 10 100 uV uV
    Current accuracy: + / - 0.1% reading
    Resistance accuracy: 0.3% or less
    Display reading: liquid crystal display: resistance, resistivity, conductivity value, temperature, pressure, automatic conversion unit, cross section, height
    Test method: four-terminal measurements
    Pressure sensor: 200 kg; (other specifications can be customized)
    Powder measuring device: mold: inner diameter 10 mm; Height: 25 mm; Pressure mode: manual hydraulic pressure/electric pressure mode (to buy)
    Working power supply: input: AC 220 v + 10%, 50 hz power consumption: < 30 w
    Host appearance size: 330 mm * 330 mm * 120 mm
    Turnning: about 6 kg

     
  • The instrument adopts the method of four terminal is suitable for use in carbon powder plant, coking plant, petrochemical plant, powder metallurgy factory, institutions of higher learning, scientific research department, quality inspection and analysis of powder sample is an important tool. This instrument adopts the 4.3 -inch LCD screen display,
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com