Introduction: FR-100 Microcomputer Universal Material Tensile Testing Machine is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and force measuring range, and has high accuracy in the measurement and control of load and displacement. Sensitivity. Simple structure, easy operation, can be placed directly on the studio floor for testing. It is particularly suitable for use in testing instruments that provide online control of product quality. This series of models is mainly suitable for non-metallic and metal materials testing less than 5T test. This machine is suitable for all kinds of textile, rubber, plastic, synthetic leather, adhesive tape, adhesive products, plastic film, composite materials, electronics, metals and other industries materials and products do stretching, compression, bending, cutting, peeling, tearing Split, two-point extension (need to add an extensometer) and other tests to determine the quality of the product. Features: 1 appearance using aluminum alloy profiles, simple and generous, pull, pressure multi-function and economical and practical 2. Touch screen curve display; stretch, compression, pressure holding test, holding pressure test; 3. Three units of measurement: N-Kgf-Lbf is optional and can be automatically exchanged; 4. The touch screen LCD display with backlight illumination can be used in poor light conditions; 5. Single measurement, you can read the pull, pressure peak in both directions, and can be automatically and manually cleared; 6. With travel limit and overload stop function. 7. Floor-type door pull machine structure beautiful and compact, economical and practical; Technical Parameters: Machine allowable maximum load: 2KN. Loading weight: 100 N, 200 N, 500 N, 1 KN, 2 KN or less (US-made) Load measurement accuracy: load cell + display ± 0.5% (0.5%-100% of full scale) Unit switching: Kg, Lb, N Resolution: 1/100000, Displacement resolution: 0.001mm Power System: AC Motor, Reducer Control system: test speed 50~350 mm/min stepless speed regulation or customer specified. Sampling frequency 400 times/second Board stroke: 400mm. Power supply: AC 220V single phase. Power: 1500W Machine size: 75×70×220cm Weight: 450kg
Introduction: FR-100 Microcomputer Universal Material Tensile Testing Machine is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and force measuring range, and has high accuracy in the measurement and control of load and displacement. Sensitivity. Simple structure, easy operation, can be placed directly on the studio floor for testing. It is particularly suitable for use in testing instruments that provide online control of product quality. This series of models is mainly suitable for non-metallic and metal materials testing less than 5T test. This machine is suitable for all kinds of textile, rubber, plastic, synthetic leather, adhesive tape, adhesive products, plastic film, composite materials, electronics, metals and other industries materials and products do stretching, compression, bending, cutting, peeling, tearing Split, two-point extension (need to add an extensometer) and other tests to determine the quality of the product.
