Introduction: The ultra-centrifugal mill FM200 is suitable for a wide range of samples. Based on its high-efficiency comminution technology and rich accessories, it can guarantee softness, hardness and brittleness in a very short time by the secondary grinding with the rotary-ring screen system. The fibrous samples were subjected to dry grinding and freeze grinding. The ultracentrifugal mill FM200 achieves two-stage pulverization of the sample by means of a rotary knife and a ring screen, placing the sample from the funnel (with anti-splash design), and the falling sample is subjected to high-speed centrifugal force and rotating teeth at high speed. Produces a huge impact force to pre-treat the sample, after which the sample is sheared, squeezed and rubbed again between the rotary knife and the fixed ring sieve, and the sample smaller than the diameter of the ring sieve enters the circular shape through the ring sieve. Collect the dishes. This two-stage pulverization principle results in a gentle and efficient comminution result. Due to the high pulverization efficiency, the sample stays in the grinding chamber for a short period of time, so that the change in the properties of the sample can be avoided. Product application: sample type: soft, hard, brittle, fibrous; typical samples: soil, electronics, coal, chemicals, plastics, pharmaceuticals, feed, grain and grain, dry plants, etc. Features: 1. Provide a variety of accessories to ensure application diversification 2. The final sample size is less than 100 microns 3. Great revolution range, adjustable range: 6000-18000 rpm 4. Two-stage rotor-ring screen system for gentle and rapid comminution 5. Low noise, reliable operation and easy cleaning 6. Rotary cutter diameter of 95 mm, line speed up to 99.43 m / s, can provide efficient grinding results 7. Touch control panel, convenient and fast 8. The fineness of the sample can be determined according to the choice of sieve ring 9. A specially designed air passage ensures a constant air flow in the grinding chamber to cool the rotor to form a ventilation system to ensure sample cooling 10. There is a double-layer wear-resistant seal between the grinding chamber and the drive motor to prevent dust from entering the motor section. 11. Electronic lock and mechanical lock double protection operator safety 12. Anti-splash funnel can effectively prevent feed blockage and effectively reduce noise 13. Can be equipped with special conversion components for large sample collection 14. The motor has anti-overload protection function, the equipment can continue to operate after overload restart Technical Parameters: Injection size: <10 mm Sample size: <40 microns Speed: 6000-18000 rev / min Receiving tank volume: Use standard collection tray: no more than 500 ml (1000 ml) Rotary cutter diameter: 95 mm Rotor circumferential speed: 29.83-99.43 m / s Optional sieve ring: 0.20, 0.50, 1.00, 2.00 mm Rated power: 760 watts Rated voltage: 220 volts, 50 Hz Instrument size (horizontal * vertical * height): 400 * 506 * 495 mm Package size (horizontal * vertical * height) : 590 * 590 * 630 mm Instrument weight: 38 kg
Introduction: The ultra-centrifugal mill FM200 is suitable for a wide range of samples. Based on its high-efficiency comminution technology and rich accessories, it can guarantee softness, hardness and brittleness in a very short time by the secondary grinding with the rotary-ring screen system. The fibrous samples were subjected to dry grinding and freeze grinding. The ultracentrifugal mill FM200 achieves two-stage pulverization of the sample by means of a rotary knife and a ring screen, placing the sample from the funnel (with anti-splash design), and the falling sample is subjected to high-speed centrifugal force and rotating teeth at high speed. Produces a huge impact force to pre-treat the sample, after which the sample is sheared, squeezed and rubbed again between the rotary knife and the fixed ring sieve, and the sample smaller than the diameter of the ring sieve enters the circular shape through the ring sieve. Collect the dishes. This two-stage pulverization principle results in a gentle and efficient comminution result. Due to the high pulverization efficiency, the sample stays in the grinding chamber for a short period of time, so that the change in the properties of the sample can be avoided. Product application: sample type: soft, hard, brittle, fibrous; typical samples: soil, electronics, coal, chemicals, plastics, pharmaceuticals, feed, grain and grain, dry plants, etc.
