Position: Home > > Measurement instrument > Other measuring/measurement instrument > Velocity meter > ES-9000B high-precision contact type rotational speed linear velocity meter for Motor on-site speed measurement

ES-9000B high-precision contact type rotational speed linear velocity meter for Motor on-site speed measurement

Product ID:CLQTcsy027

US$0.00 ~ US$1.00 PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberES-9000B
    Brand NameGUANGZHOUANMIAO
    Payment TermsT/T, paypal
    ES-9000B high-precision contact type rotational speed linear velocity meter
     
    Introduction:
    ES-9000B high-precision contact type rotational speed linear velocity meter is a small, portable, battery-operated hand-held rotational speed linear velocity meter.
    Features:
    1. It can store 20 sets of data, including CH1 value, CH2 value, and maximum value. Can order larger storage capacity.
    2. Maximum hold function.
    3. The average value calculation function, which can calculate the average value of up to 200 measured values, and the measurement time interval is 10ms.
    4. The battery low voltage prompt function.
    5. Distance measurement function.
    6. Bluetooth printer function, directly print measurement data.
    7. It can be connected to the computer through a USB data cable or a Bluetooth adapter to realize data transmission function.
    Technical Parameters:
    Test part
    Measuring range: Speed ​​measurement: 0.1~2,000.0m/min
    Speed ​​measurement: 1~20,000r/min
    Distance measurement: 0~999mm
    Note: The measurement range can be up to 5,000mm, but the accuracy of numerical values ​​beyond 999mm cannot be guaranteed.
    Measurement accuracy: ±1 count
    Measuring time: 10ms
    Measurement unit: m/min, r/min, mm
    Automatic shutdown: 180 seconds automatic shutdown without key operation
    Data retention function: CH1, CH2, maximum
    Average calculation: 1~200 times (can be set arbitrarily)
    Storage function: Save 20 sets of measurement data (larger quantities can be customized)
    Check part
    Pulse number: 400 pulses/revolution, slit reflection method
    Light source: infrared light emitting diode
    Light source receiving element: light emitting diode
    Allowable value: 5kg in radial direction, 5kg in thrust direction
    Bearing life: 2x107r/min•h (at the maximum load of the specification)
    Analysis output section
    Output value: instantaneous value (after average calculation processing)
    Voltage range: 0~full scale/0~1V
    Conversion method: 10-bit D/A conversion
    Linear speed: ±1% of full scale
    Output connector: φ2.5mm pin plug
    Pulse output section
    Output mode: Transistor output (open collector output gate)
    Withstand voltage: 14V
    Number of pulses: 800 pulses/revolution
    Logic: Negative logic/Negative logic
    Pulse width: about 0.5~1.2μs
    Output connector: φ2.5mm pin plug
    General specification
    Power supply: 2 3.7V rechargeable 14500 lithium batteries
    Working temperature: 0~45˚C
    Storage temperature: -10~60˚C
    Working humidity: 35~85%RH (except condensation)
    Storage humidity: 35~85%RH (except condensation)
    Dimensions: 211x80x36mm (8.3x3.1x1.4")
    Weight (including battery): 270g (9.52oz)
  • Introduction:
    ES-9000B high-precision contact type rotational speed linear velocity meter is a small, portable, battery-operated hand-held rotational speed linear velocity meter.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com