Elveflow MUX micro fluid switch

Position: Home > > Life science instrument and equipment > Chip system > Microfluidic chip > Elveflow MUX micro fluid switch

Elveflow MUX micro fluid switch

Product ID：SHXPwlk023

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Other information

Brand NameSZWDSYKJ

Payment TermsT/T, paypal

Brief introduction:
MUX valve controller is used for quick switching and switching of fluid in different channels in microfluidic chip. MUX multi-valve controller is suitable for various control modes. The MUX QUAKE VALVE is used to control the PDMS double-layer switch, providing up to 16 pressure outputs and up to 16 channels. MUX CROSS CHIP provides four fluid input interfaces and four fluid output interfaces. The fluid can enter from any input interface and output from any output interface. The MUX FLOW MAYRIX micro volume valve provides a maximum of 16 channel switches to control the input and output of 16 fluids at the same time. The MUX DISTRIBUTOR microflow valve has six input interfaces and one output interface, which controls the output of six different fluids in turn. MUX series fluid channel switch switch time is less than 50ms, no reflux and cross contamination, which is the best choice for microfluidic channel switch and switch.
Equipment parameters:

MUX Elveflow flow switch		Cross Chip	Flow Switch Matrix	Quake valve	Distributor
Power Supply	Input voltage range, AC	100V to 240V
	AC supply frequency	50 Hz to 60 Hz
	Input current, AC	1A
	Power consumption	35W
	Safety	IEC/EN61010-1:2001
	Shutting down power supply	button switch or disconnect the AC/DC adapter			disconnect AC/DC adapter
Performances	Valves response time	20ms			300ms
	Max supported pressure	2bar(29PSI)			9bar(125PSI)
Mechanical Specifications	Valve type	2/2-way Solenoid Valve		3/2-way Solenoid Valve	6 positions/7ports Or 10 positions/11 ports rotative valve
	Input/Output connectors	10-32 UNF (PEEK tube to port fittings adapters provided)			1/16 or 1/8 fitting-less tubing connection system
	Dimensions L×d× h(mm)	220X130X130			160x76×117
	Operating temperature	0℃ to 40℃
	Operating humidity	20 to 80%
Software	Computer specifications	USB 2.0 port, Intel Pentium ll 500 MHz, 1 Go Hard Disk space, 2 Go RAM Windows XP/ista/7/8, 32/64 bit Labview 2011 is required when using Labview@ libraries
	Connection type	USB
		Labview library, Matlab@ library, C DLLS