EK-max600 knife mill Introduction: The fully automatic dual-channel knife mill is a specialized instrument for crushing and homogenization processing. It can crush samples to the required analytical fineness within tens of seconds, achieving a high degree of homogenization in the crushing results. It meets various professional requirements for laboratory operations and analysis processes, and is particularly suitable for homogenizing large-volume samples in the laboratory. It is applicable to the crushing and grinding of soft, medium-hard, brittle, and fibrous samples, especially suitable for the grinding and homogenization processing of samples containing water, oil, fat, and fiber. It can handle sample volumes ranging from 1 to 5 liters simultaneously, such as fruits, vegetables, seafood, nuts, grains, fruits and vegetables, livestock and poultry, aquatic products, feed, fruits, vegetables, meat, sausages, fish, animal organs, and other samples. Features: 1. The instrument can process one or two samples simultaneously (single or dual channels, capable of independent operation without affecting each other); 2. The instrument features an intelligent electronically controlled self-priming lock. After being locked by touch, it automatically senses the approach and completes the locking process through suction; 3. The instrument is equipped with dual 4.3-inch touch displays, making operation convenient and simple; 4. Motor speed: Dual-band independent control, digital display, continuously adjustable; 5. Rotating blade diameter: 119mm for the two-blade rotating blade, 175mm for the four-blade rotating blade, with a linear velocity of 62m/s; 6. It features intermittent mode, gradual mode, click-and-float mode, and boost mode; 7. The inner cavity of the rotating blade is equipped with a dynamic sealing magnetic component. Technical Specifications: Sample injection size: ≤130mm; Final sample size: less than 300μm (slightly different due to sample variations) Speed: Speed setting range of 1000-10000rpm (speed of 16000rpm in boost mode), with dual frequency bands independently controllable, digital display, and continuously adjustable; Sample preparation methods: dry grinding, wet grinding, and cryogenic grinding; The system can handle 2 samples simultaneously, and can process 1 or 2 samples independently (with single or dual channels) without affecting each other; Number of channels: Dual channel Rotating Knife: The instrument is compatible with both two-blade and four-blade rotating knives. The diameter of the four-blade rotating knife should not be less than 175mm, and the diameter of the two-blade rotating knife should not be less than 119mm. The peripheral linear velocity of the cutting head is 62m/s. The rotating knife blades are not on the same horizontal plane, maintaining a certain spacing height. They are distinguished by their tough and blunt surfaces, which can be used for coarse crushing or fine grinding of large samples, respectively;
EK-max600 knife mill Introduction: The fully automatic dual-channel knife mill is a specialized instrument for crushing and homogenization processing. It can crush samples to the required analytical fineness within tens of seconds, achieving a high degree of homogenization in the crushing results. It meets various professional requirements for laboratory operations and analysis processes, and is particularly suitable for homogenizing large-volume samples in the laboratory. It is applicable to the crushing and grinding of soft, medium-hard, brittle, and fibrous samples, especially suitable for the grinding and homogenization processing of samples containing water, oil, fat, and fiber. It can handle sample volumes ranging from 1 to 5 liters simultaneously, such as fruits, vegetables, seafood, nuts, grains, fruits and vegetables, livestock and poultry, aquatic products, feed, fruits, vegetables, meat, sausages, fish, animal organs, and other samples.
