DR6000 anti-corrosion coating thickness gauge Introduction: The DR6000 anti-corrosion coating thickness gauge is a professional non-destructive testing instrument that applies the principle of electromagnetic induction and follows the national industry standard GB/T 4956-1985 to measure the thickness of the coating layer on the surface of magnetic metal materials. It can measure the thickness of non-magnetic coatings on magnetic metal substrates (such as steel and iron) without damage (such as paint, electrophoresis, powder coating, galvanizing, chromium, copper, indium, enamel, rubber, enamel, anti-corrosion coating, paint, etc.). It is easy to use, convenient to carry, with a large LCD display screen, large font size, and backlight direct reading for clearer results. It uses imported high-quality metal material small probes, with precise and firm structure, better repeatability, and excellent performance. characteristic: 1. This instrument is simple, portable, exquisite in appearance, finely crafted, and precise in measurement 2. Fully intelligent touch buttons, anti slip type, unique and innovative design, user-friendly, tightly structured 3. Adopting imported high-quality metal small probes, the performance is more stable, wear-resistant and pressure resistant, and has a long service life 4. Simple operation, fast testing speed, good sensitivity, and high measurement accuracy 5. It has two testing methods: Continuous and Single measurement methods 6. It has four statistical functions: maximum value (MAX), minimum value (MIN), average value (MEA), and measurement frequency (No) 7. Two calibration methods can be used: zero point calibration and two-point calibration 8. The operation process is indicated by a buzzing sound (single measurement method) 9. Automatically identify iron-based and non-ferrous substrates 10. Conversion from metric to imperial system in μ m/Mil 11. Large LCD screen backlight display mode, low voltage indication 12. Manual/automatic shutdown function Technical parameters: Measurement range: 0-6000 μ m (9500 μ m models can be selected if it exceeds 6000 μ m) Usage environment: Temperature: 0 ℃ -50 ℃, humidity: 20% RH -90% RH, used in an environment without strong magnetic fields Thinest substrate: 0.4mm Measurement accuracy: ± 3% H+2 μ m Resolution: 0.1 μ m/1 μ m (0.1 μ m below 100 μ m, 1 μ m above 100 μ m) Minimum substrate area 16 * 16mm Minimum curvature: convex 5mm; concave 25mm Dimensions: 130mm * 70mm * 24mm Weight: 100g Power supply: Three (No. 7) alkaline batteries
Introduction: The DR6000 anti-corrosion coating thickness gauge is a professional non-destructive testing instrument that applies the principle of electromagnetic induction and follows the national industry standard GB/T 4956-1985 to measure the thickness of the coating layer on the surface of magnetic metal materials. It can measure the thickness of non-magnetic coatings on magnetic metal substrates (such as steel and iron) without damage (such as paint, electrophoresis, powder coating, galvanizing, chromium, copper, indium, enamel, rubber, enamel, anti-corrosion coating, paint, etc.). It is easy to use, convenient to carry, with a large LCD display screen, large font size, and backlight direct reading for clearer results. It uses imported high-quality metal material small probes, with precise and firm structure, better repeatability, and excellent performance.
