Position: Home > > Analytical instruments > Moisture teller > Dew point meter > DPME-G dew point analyzer

DPME-G dew point analyzer

Product ID:FSHld009

Price: US$1,600.00 ~ US$3,000.00 PDF Format
Supply Ability:50SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberDPME-G
    Brand NameYIMA
    Payment TermsT/T, paypal
    DPME-G dew point analyzer
    Brief introduction:
    DPME-G dewpoint meter , the use of capacitive sensors , its working principle is based on changes in the concentration of water molecules on the capacitance value , and thus measure the moisture content of trace gases . Imported alumina or polymer film sensor and advanced digital processing technology, the rapid succession of trace moisture -line analysis .
    Features:
    Using 320 * 240LCD monitors, desktop or panel mounted , easy to install
    Imported dew point sensor , long life , high sensitivity , fast response
    Comes with precision filter , greatly improving sensor life
    Upper and lower control points can be set within the whole range
     Data backup, data recovery
    Standard 4-20mA or 0-5V output
    Standard RS232/RS485 communication
    Chinese operation menu ( English custom )
    Built- precision air pump ( optional )
    Technical parameters:
    Measuring range : +20 ~ -100 °C 0-1000PPmv ( range optional )
    Resolution : 0.1 °C; simultaneously display PPmv, mg/m3
    Accuracy : ≤ ± 2 °C
    Repeatability : ≤ ± 1.5 °C
    Response time : T90 ≤ 5min ( from low humidity to high humidity )
    Warm-up time : ≤ 5min
    Sample gas flow : 2000 ± 100mL
    Sample gas pressure : 0.1Mpa ≤ inlet pressure ≤ 0.2Mpa
    Power supply : 100 ~ 240VAC 50/60Hz 1A
    Ambient temperature : -5 °C ~ +45 °C
    Humidity : ≤ 90% RH
    Output signal : 4 ~ 20mA or 0 ~ 5VDC
    Communication mode : RS232 or RS485 ( communication protocols : Modbus RTU)
    Dimensions:
    3U Standard - 484 ( W ) × 134 ( height ) × 310 ( depth ), (mm)
    4U Standard - 484 ( W ) × 177 ( height ) × 390 ( depth ), (mm)
    Hole Size:
    3U Standard - 446 ( W ) × 135 ( height ), (mm)
    4U standard - 446 ( W ) × 179 ( height ), (mm)
    Weight: about 5kg
     
  • The DPME-G dew point meter uses a capacitive sensor. Its working principle is to measure the amount of trace moisture in the gas according to the change of the capacitance value of the water molecule. Continuous high-speed on-line analysis of trace moisture is achieved by using imported alumina or polymer film sensors and advanced digital processing technology.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com