Introduction: The soil grinder DP50 adopts horizontal stacking up and down, one static and one moving grinding disc makes relative movement, which can quickly grind medium-hard and brittle materials to below 100 microns. Due to the simple operation, high efficiency, and little residual material in the grinding chamber, the instrument is one of the preferred equipment for sample preparation laboratories for multiple sample batches of environmental soil. Typical sample Soil, building materials, nuclear ore, cement, concrete, slag, coke, glass, ceramics, ore, refractory clay, granite, bauxite, etc. Features 1. Realize the repeatability of the result through precise adjustment of the width of the grinding disc gap; 2. The sample can be pre-crushed and finely crushed; 3. Grinding cavity hinge design, easy to clean; 4. Long service life of the grinding disc; 5. Pollution-free grinding of various materials; 6. Dust removal design Technical parameter: Feeding size: <2mm Discharge size: <75 microns (95%) Speed: 800 rpm Receiving tank volume: 2 liters Grinding kit material: hard steel, agate, zirconia, corundum, tungsten carbide Grinding gap width adjustment: 0-25 mm Rated power: 550 watts
Introduction: The soil grinder DP50 adopts horizontal stacking up and down, one static and one moving grinding disc makes relative movement, which can quickly grind medium-hard and brittle materials to below 100 microns. Due to the simple operation, high efficiency, and little residual material in the grinding chamber, the instrument is one of the preferred equipment for sample preparation laboratories for multiple sample batches of environmental soil. Typical sample Soil, building materials, nuclear ore, cement, concrete, slag, coke, glass, ceramics, ore, refractory clay, granite, bauxite, etc.
