Position: Home > > Lab general equipment > Sample preparation and digestion > Electric heating plate > CX-1 Teflon anti-adhesive digital heating table

CX-1 Teflon anti-adhesive digital heating table

Product ID:SYZYXJdrb022

Price: Please inquire PDF Format
Supply Ability:200 SETS/MONTH
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberCX-1
    Brand NameYCCX
    Payment TermsT/T, paypal
    Features:
    1. The heater is made by a special molding process, and the high temperature state is never deformed.
    2. The work panel is made of stainless steel, which has excellent corrosion resistance and uniform working surface temperature
    3, rapid heating, easy operation, safe use
    4, LED display microcomputer temperature control
    Technical Parameters:
    Model:CX-1
    Heating power: 500W
    Heating area: 0.03m2
    Overall size: 200*150
    Power supply: AC 220V 50HZ
    Conditions of Use: Ambient temperature -20°C+60°C; Relative humidity<80%.
    Electric strength: sinusoidal alternating current withstand voltage test with voltage 1500V50HZ, no breakdown phenomenon at 1M1N under pressure.
    Leakage current: <0.5MA.
    Insulation resistance: >2MΩ.
    Grounding resistance: <0.1Ω.
    Power deviation: +5% to -10%.
    Precautions:
    1. Wipe the working surface of the heating plate clean, and do not allow water droplets, dirt, scale, and other foreign substances to remain on it.
    2. Place the experimental sample correctly.
    3, connected to the external power supply, close the power switch, indicator light (control set the desired temperature value), electric hot plate in a non-working state. Adjust the knob (adjusted to the required heating speed). When the working surface temperature rises, the adjustment knob makes the heating plate heated slowly to achieve long-term work, which is conducive to prolong the service life of the electric heating plate.
    4, adjust the thermostat button to the desired temperature. The hot plate is in working condition. At this time, special personnel should take care of it.
    5, work is completed, turn off the power switch, cut off the power.

  • Features:
    1. The heater is made by a special molding process, and the high temperature state is never deformed.
    2. The work panel is made of stainless steel, which has excellent corrosion resistance and uniform working surface temperature
    3, rapid heating, easy operation, safe use
    4, LED display microcomputer temperature control
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com