Attenuator |
Every 12dB ± 1dB |
Equivalent Input Noise |
<40×10-9 V/√HZ |
Transmitter Pulse |
Transmission Pulse Voltage of the square wave: 25~250V, tunable with the increment of 25V. |
Transmission Mode |
Mono or Dual |
Damping |
400、80Ω |
Frequency |
0.5~20MHz.Broad band/Narrow band optional |
Gain |
0.0~110.0dB. Four shifts of increment 0.1/1.0/2.0/6.0dB.Shift 0.1dB is a smart speed-up jumper as triggered |
Material Velocity |
1000~15000m/s continuously tunable. 30 sets of common material velocities are selectable |
Range |
0.0~10000.0mm(longitudinal wave at steel velocity). The range is tunable with min 0.1mm increments |
Detection |
positive,negative,full,RF |
Alarm |
Alarming conditions of wave-gain, wave-loss, min thickness and DAC are optional |
Real-time alarming indicated by horn or LED indicator |
Display |
5.7" (640×480) high-resolution TFT color LCD |
Pulse offset |
-7.5~3000μs |
Probe Zero Offset |
0~999.9μs |
Pulse Repetition Frequency |
25~1000Hz, auto and manual modes optional |
Vertical Linearity Error |
≤3% |
Vertical Linearity Error |
≤0.1% |
Surplus Sensitivity |
≥63dB(200Ф2 flat bottom hole) |
Resolution |
≥34dB (5P14) |
Dynamic Range |
≥32dB |
Reject |
(0~90)% |
RF Output Impedance |
50Ω |
Synchronous Data Collection and Output Mode |
Open Collector gate (OC gate) |
Noise Level |
<10% |
Port |
C6/Q9(customized) transducer connector(socket) |
USB HOST |
LAN,RF OUT |
Power Supply |
Large-capacity Li Battery, no memory effect. Battery running time: more than 6 hours |
I-set charger, AC Mains 220V |
Environmental Temperature |
-30~50℃ |
Relative Humidity |
20%~95%RH |
Weight |
1.4Kg(with battery) |
Dimension |
240mm×172mm×44mm |