CST603G Cathodic Protection Monitor Introduction: The CST603G cathodic protection monitor is a multi parameter monitoring instrument used for cathodic protection of buried pipelines, including AC interference potential, natural corrosion potential, energized potential, and de energized potential. It can determine the cathodic protection effect by measuring the potential between the protected object, polarized test piece, self corroding test piece, and reference electrode. This instrument is equipped with a large capacity battery, which can last for 2 years under typical working conditions. It also has a built-in USB port, which can support on-site downloading of historical data from laptops or data downloaders. The instrument is equipped with a low-power 4G wireless module, which can wirelessly transmit historical measurement data to public or private cloud servers at regular intervals, and evaluate the effectiveness of the cathodic protection system through data analysis software. The CST603G cathodic protection monitor can effectively eliminate power frequency interference. The instantaneous break potential is tested according to the GB/T 21246 power-off potential testing method, which uses a relay on and off for 4 seconds and 1 second, and collects the instantaneous break protection potential of the test piece relative to the reference electrode within 100 ms after power-off. This potential value eliminates the IR drop in the cathodic protection potential and accurately reflects the true protection status of the buried pipeline. Technical parameters: Product model: CST603G Potential measurement channels: 4 channels (protective potential, self corrosion potential, power-off potential, interference potential) Potential measurement range: −2.5V~+2.5V Potential measurement accuracy: 0.1% ± 10mV at full scale Current measurement range: −20mA~+20mA Current measurement accuracy: 0.1% of full scale AC signal measurement: capable of collecting AC potential signals with frequencies ranging from 1Hz to 10KHz and amplitudes of ± 25V Power off sampling time: 1 second to 100 seconds, configurable; Data storage capacity: 8Mbyte, Can store 100000 sets RTC clock error:<1 minute/month Timed measurement interval: 1-24 hours Communication method: RS485, Standard Modbus protocol Power supply mode: DC12-24V or 7.2V lithium sulfur battery power supply Size: φ90*252mm Weight: 1kg Working temperature: -30 ° C~60 ° C Working humidity: ≤80% Shell material: plastic Protection level: IP65
Introduction: The CST603G cathodic protection monitor is a multi parameter monitoring instrument used for cathodic protection of buried pipelines, including AC interference potential, natural corrosion potential, energized potential, and de energized potential. It can determine the cathodic protection effect by measuring the potential between the protected object, polarized test piece, self corroding test piece, and reference electrode. This instrument is equipped with a large capacity battery, which can last for 2 years under typical working conditions. It also has a built-in USB port, which can support on-site downloading of historical data from laptops or data downloaders. The instrument is equipped with a low-power 4G wireless module, which can wirelessly transmit historical measurement data to public or private cloud servers at regular intervals, and evaluate the effectiveness of the cathodic protection system through data analysis software. The CST603G cathodic protection monitor can effectively eliminate power frequency interference. The instantaneous break potential is tested according to the GB/T 21246 power-off potential testing method, which uses a relay on and off for 4 seconds and 1 second, and collects the instantaneous break protection potential of the test piece relative to the reference electrode within 100 ms after power-off. This potential value eliminates the IR drop in the cathodic protection potential and accurately reflects the true protection status of the buried pipeline.