Position: Home > > Analytical instruments > Electrochemical Equipment > Corrosion tester > CST480MS Atmospheric Corrosion Monitoring Instrument

CST480MS Atmospheric Corrosion Monitoring Instrument

Product ID:FDfs027

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
  • Product Introduction
  • Other information
  • Model NumberCST480MS
    Brand NameWHKEPU
    Payment TermsTT,PAYPAL,Alibaba.com Pay
    CST480MS Atmospheric Corrosion Monitoring Instrument
    Introduction:
    In humid and salty atmospheric environments, metal structural components and electronic devices may suffer from severe atmospheric corrosion, and even trace amounts of corrosion can cause circuit failures, leading to damage to electrical control equipment and even safety accidents. In addition, the accumulation of corrosion products can lead to a decrease in high-voltage insulation performance and even cause creepage fires. To ensure the reliability of electronic devices, it is not only necessary to monitor environmental temperature and humidity, but also to monitor the atmospheric corrosion rate and amount of key electronic materials, and optimize protective process parameters through monitoring data feedback.
    The CST480MS series is a precision resistance type atmospheric corrosion monitoring instrument designed according to the ISO 9224-2012 standard. This monitoring device adopts thin metal sensors and precision resistance measurement technology, combined with alternating constant current excitation source and high-precision AV bridge principle, to achieve precise micro resistance measurement. It has a 10 nm metal corrosion thinning resolution and can automatically compensate for environmental temperature drift, ensuring the stability and reliability of measurement results. CST4804 four channel version can simultaneously measure the corrosion thinning amount and corrosion rate of four metal materials (such as carbon steel, stainless steel, copper alloy, aluminum alloy, etc.), and evaluate the environmental corrosion level based on the monitoring results.
    Technical parameters:
    AD sampling resolution: 24bit, Dual channel S-D synchronous sampling
    Probe Cu thin film thickness: 100 mm ~1000 mm
    Corrosion thinning resolution: ≤ 10 nm or (0.01% @ test piece thickness)
    Sensor lifespan: Over 5 years (ISA-71.04-1985: G2 level)
    Temperature measurement range: -30 to+60 ℃, ± 1 ℃
    Humidity measurement range: 0%~100% RH, ± 3%
    Atmospheric pressure measurement range: 300~1100 hPa, ± 1 hPa
    Data storage capacity: 16 Mbyte, Can store 50000 sets
    RTC clock error:<1 minute/month
    Timed measurement interval: 1-24 hours
    Communication method: RS485, Standard Modbus protocol
    Power supply mode: DC 6~12V, Or built-in 3.7V lithium-ion battery
    Size: 90mm × 98mm × 65mm
    134.5mm × 70mm × 55mm (four channels)
    Weight: 420g
    Working temperature: -30 ° C~60 ° C
    Working humidity: ≤80%
    Shell material: plastic
    Protection level: IP65

     
     
  • Introduction:
    In humid and salty atmospheric environments, metal structural components and electronic devices may suffer from severe atmospheric corrosion, and even trace amounts of corrosion can cause circuit failures, leading to damage to electrical control equipment and even safety accidents. In addition, the accumulation of corrosion products can lead to a decrease in high-voltage insulation performance and even cause creepage fires. To ensure the reliability of electronic devices, it is not only necessary to monitor environmental temperature and humidity, but also to monitor the atmospheric corrosion rate and amount of key electronic materials, and optimize protective process parameters through monitoring data feedback.
    The CST480MS series is a precision resistance type atmospheric corrosion monitoring instrument designed according to the ISO 9224-2012 standard. This monitoring device adopts thin metal sensors and precision resistance measurement technology, combined with alternating constant current excitation source and high-precision AV bridge principle, to achieve precise micro resistance measurement. It has a 10 nm metal corrosion thinning resolution and can automatically compensate for environmental temperature drift, ensuring the stability and reliability of measurement results. CST4804 four channel version can simultaneously measure the corrosion thinning amount and corrosion rate of four metal materials (such as carbon steel, stainless steel, copper alloy, aluminum alloy, etc.), and evaluate the environmental corrosion level based on the monitoring results.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com