CST1808 Coating Impedance Online Monitoring Instrument Introduction: The CST1808 coating impedance online monitor monitors the aging status of coatings by measuring the trend of the impedance spectrum of coating probes over time in atmospheric and aquatic environments. Fixed coating probes will also be used, which will be attached to the coating surface of the workpiece to achieve long-term monitoring of the in-situ coating aging process and provide real-time data for preventive maintenance of coating damage. The CST1808 coating impedance online monitoring instrument is based on the principle of electrochemical impedance and uses high-speed digital analog electronic technology to achieve high-precision impedance measurement and characteristic impedance calculation. It can measure the impedance of coatings at a wide frequency fixed point (10Hz to 100KHz) from low impedance to high impedance (103 Ω to 1010 Ω). This instrument can measure the interface capacitance, real part of impedance, imaginary part of impedance, and phase angle of coatings/metal substrates under natural or artificial acceleration environments, and then calculate the coating moisture content, conductivity, and coating aging rate. Suitable for online monitoring of coating aging and damage status in atmospheric, water or artificial environments. Technical parameters: Product model: CST1808 Measurement channels: 4 channels Impedance measurement range: 103 Ω~1010 Ω Input impedance: ≥ 1012 Ω Frequency measurement range: 10 Hz~100KHz AC signal amplitude: 10 mV~1000 mV Storage: 8Mbyte, Can store 100000 pieces of data Communication method: RS485, Standard Modbus protocol Power supply mode: DC12V Size: 180mm × 130mm × 60mm Weight: 1.0kg Working temperature: -20 ° C~60 ° C Working humidity: ≤80% Shell material: plastic Protection level: IP67
Introduction: The CST1808 coating impedance online monitor monitors the aging status of coatings by measuring the trend of the impedance spectrum of coating probes over time in atmospheric and aquatic environments. Fixed coating probes will also be used, which will be attached to the coating surface of the workpiece to achieve long-term monitoring of the in-situ coating aging process and provide real-time data for preventive maintenance of coating damage. The CST1808 coating impedance online monitoring instrument is based on the principle of electrochemical impedance and uses high-speed digital analog electronic technology to achieve high-precision impedance measurement and characteristic impedance calculation. It can measure the impedance of coatings at a wide frequency fixed point (10Hz to 100KHz) from low impedance to high impedance (103 Ω to 1010 Ω). This instrument can measure the interface capacitance, real part of impedance, imaginary part of impedance, and phase angle of coatings/metal substrates under natural or artificial acceleration environments, and then calculate the coating moisture content, conductivity, and coating aging rate. Suitable for online monitoring of coating aging and damage status in atmospheric, water or artificial environments.