CM51 cutting pulverizer Introduction: The cutting pulverizer CM51 perfectly fits the pulverization of samples with different levels of fragmentation and temperature sensitivity, and can handle both conventional and unconventional samples perfectly. It is a must-have model for heavy metal RoHS and WEEE testing. In addition, dry materials can also be crushed in batches or continuously, and longer fibrous samples and large volume samples can be completed in one step without pre crushing. Application areas: Traditional Chinese Medicine, Electronics, Environment/Solid Waste, Construction/Cement, Agriculture, etc Typical samples: rubber, plastic, garbage, circuit boards, wood, cardboard, paper, seasonings, straw, straw, equipment raw materials, bones, feed, cables, plastics, grains, lignite and peat, etc. characteristic: 1. The injection funnel adopts an anti splash protection design 2. Special design facilitates the refinement of granular materials 3. The operation is simple and safe, and the electronic safety switch can prevent the instrument from being started when the door is open; 4. The rotating blade, sieve ring, and funnel can be easily removed and installed, making it convenient for laboratory personnel to clean the grinding chamber; 5. Strong horsepower, capable of crushing samples with strong and tough fibers, such as garbage, circuit boards, dog bite glue, rubber and plastic, etc; 6. The crushing chamber and hopper are made of materials that are easy to clean and in contact with the sample. Technical parameters: Injection size:<25 millimeters Sample size: 0.2~6.0 millimeters Speed: 500-6000 revolutions per minute Sample processing capacity: 250 milliliters (maximum per time) Available screening aperture: 0.25/0.5/0.75/1.0/2.0/4.0/6.0mm Turning knife: Standard parallel rotating knife Collection bottle capacity: 250 milliliters Rated power: 800 watts Rated voltage: 220V, 50Hz Instrument dimensions (width * height * depth): 270x476x340mm Packaging size: 450x400x550 millimeters Instrument weight: About 35 kilograms
Introduction: The cutting pulverizer CM51 perfectly fits the pulverization of samples with different levels of fragmentation and temperature sensitivity, and can handle both conventional and unconventional samples perfectly. It is a must-have model for heavy metal RoHS and WEEE testing. In addition, dry materials can also be crushed in batches or continuously, and longer fibrous samples and large volume samples can be completed in one step without pre crushing. Application areas: Traditional Chinese Medicine, Electronics, Environment/Solid Waste, Construction/Cement, Agriculture, etc Typical samples: rubber, plastic, garbage, circuit boards, wood, cardboard, paper, seasonings, straw, straw, equipment raw materials, bones, feed, cables, plastics, grains, lignite and peat, etc.
