CH800-A non-metallic plate thickness tester Introduction: The CH800-A non-metallic plate thickness tester is used to measure the thickness of non-metallic materials (walls, beams, columns, wood, ceramics, etc.) Check the thickness of the concrete floor slab. The product is applicable to the national standard of the National Standards of the People's Republic of China GB 50204-2002 Code for Acceptance of Construction Quality of Concrete Structural engineering Features: 1. The host and receiving probe adopt a separate type, so the contact surface between the receiving probe and the floor is small. 2. Intelligent interpretation and automatic locking, real-time display of thickness value, reduce Personal equation, and reduce labor intensity. 3. The transmitting probe and receiving probe are wireless communication methods, and there is no connecting line between them; 4. Double sided non-destructive testing, floor slabs do not require any treatment or coupling agents; 5. Fast testing speed, with an average of 3-5 points measured every three minutes; 6. High testing accuracy, with instrument digital prompts and guidance to align with the probe; 7. The thickness is directly displayed without analysis and conversion, and the results can be stored and printed. Technical parameters: Model: CH800 Thickness measurement range (mm): 40-600 Thickness measurement accuracy 40-400 (mm): ≤ ± 1mm Thickness measurement accuracy 401-600 (mm): ≤ ± 2mm Data storage capacity: 40000 measurement point data Host size mm: 270 × one hundred and fifty × forty-five Emission probe mm: Ф one hundred × one hundred and twenty Receiving probe mm: Ф sixty × eighty Host power supply: 9VDC (6 No. 5 batteries) Transmission probe power supply: 9VDC (built-in lithium battery) Interface type: Standard USB-B interface Extension rod (aluminum alloy rod): 4 pieces Ф twenty-five × 600mm Host size: 220 * 145 * 60mm Environmental temperature: -10 ℃ -+40 ℃, avoid prolonged direct sunlight exposure Relative humidity:<90% RH Electromagnetic interference: no strong alternating electromagnetic field
Introduction: The CH800-A non-metallic plate thickness tester is used to measure the thickness of non-metallic materials (walls, beams, columns, wood, ceramics, etc.) Check the thickness of the concrete floor slab. The product is applicable to the national standard of the National Standards of the People's Republic of China GB 50204-2002 Code for Acceptance of Construction Quality of Concrete Structural engineering
