Introduction
The BS-40A automatic partial collector, also called component collector and fraction collector, is the basic equipment for biochemical experiments and biopharmaceutical production. It is used to automatically collect the droplets flowing out of the column to achieve different active groups. Dispense into different test tubes. The automatic partial collector is a device for automatically separating the solution separated from the chromatography tube by chromatography, and is suitable for scientific research, medical treatment, and other departments of the laboratory for liquid chromatography. Layer analysis experiment, the instrument can automatically collect the chromatographic liquid, instead of manual operation, and improve the working efficiency. It is separated from the Jinpeng nucleic acid protein detector/UV detector, constant current pump, chromatography column and data workstation. Chromatography system. Using a new microcomputer chip, it can automatically collect, collect and record peak sampling and collect chromatographic solution, realize automatic sampling and collection, collect quality and work efficiency, and is deeply equipped by scientific research institutions and factories and mines for scientific research and production. Tsinghua University, Peking University, Fudan University and other institutions are widely used. Features
It adopts fully enclosed environmentally friendly molecular strength ABS material, and the injection mold is sub-molded, firm and beautiful;
35° bevel control panel design, ergonomic, easy to control without bending over;
Digital tube LED display mode, new microcomputer chip control;
Unique collection plate digital design to ensure test tube check number;
Collection function: automatic collection, can be arbitrarily selected, collecting and changing without deviation, changing tube positioning;
Timing function: collecting time, inverting, timing, arbitrarily selecting, freely interchangeable with the same size test tube, no need to check the position;
Parameter setting function: parameters, setting tube and final tube can be set arbitrarily;
Keebio fluid shut-off valve, test tube resistant to organic solvents (optional);
External trigger function: The dedicated COM interface is directly connected and controlled to be used with the constant current pump. Technical Parameters
Product model: BS-40A
Collecting test tubes: 40
Capacity: 50ml
Display mode: digital tube
Timing collection range: 1 second - 199 hours 59 minutes 59 seconds, any choice
Test tube rack: round digital marker test tube
Power outage data retention: ten years
Continuous working time: more than 200 hours
Introduction
The BS-40A automatic partial collector, also called component collector and fraction collector, is the basic equipment for biochemical experiments and biopharmaceutical production. It is used to automatically collect the droplets flowing out of the column to achieve different active groups. Dispense into different test tubes. The automatic partial collector is a device for automatically separating the solution separated from the chromatography tube by chromatography, and is suitable for scientific research, medical treatment, and other departments of the laboratory for liquid chromatography. Layer analysis experiment, the instrument can automatically collect the chromatographic liquid, instead of manual operation, and improve the working efficiency. It is separated from the Jinpeng nucleic acid protein detector/UV detector, constant current pump, chromatography column and data workstation. Chromatography system. Using a new microcomputer chip, it can automatically collect, collect and record peak sampling and collect chromatographic solution, realize automatic sampling and collection, collect quality and work efficiency, and is deeply equipped by scientific research institutions and factories and mines for scientific research and production. Tsinghua University, Peking University, Fudan University and other institutions are widely used.
