| Model | Model | BL-EX400PI |
| Name | 700TVL CCD super wide dynamic ICR day and night hemispherical camera | |
| Camera | Sensor type | SONY Super HAD CCD II |
| Effective pixels | 976(horizontal) * 582(vertical) | |
| Signal system | PAL | |
| Minimum illumination | Color :0.001Lux @(F1.2,AGC ON),0.0001Lux@ (F1.2, AGC ON, sensitivity * 512) |
|
| Black and white :0.0001Lux @(F1.2,AGC ON),0.00001Lux @(F1.2,AGC ON, sensitivity * 512) | ||
| Color :0.0014Lux @(F1.4,AGC ON),0.00014Lux@ (F1.4,AGC ON, sensitivity * 512) |
||
| Black and white :0.00014Lux @(F1.4,AGC ON), 0.000014Lux @(F1.4,AGC ON, sensitivity * 512) |
||
| Shutter | 1/50s to 1/100,000s | |
| Lens | 2.8~12mm@ F1.4 | |
| Lens interface type | Φ14 | |
| Automatic aperture | DC drive | |
| Adjust angle | Level: 0 ° ~ 340 °;Vertical: 0 ° ~ 75 °.Rotation: 0 ° ~ 355 ° | |
| Day night conversion mode | ICR infrared filter type | |
| Horizontal resolution | 700TVL | |
| Wide dynamic range | More than 75 db | |
| synchronously | Internal synchronization/power synchronization | |
| Video output | 1Vp-p Composite Output(75Ω/BNC) | |
| Test Monitor OUT[1Vp-p Composite Output(75Ω/BNC), Device line |
||
| Signal to noise ratio | More than 62 db | |
| Menu control | Camera identification number | Off/on (52 characters, position setting) |
| Automatic gain | Automatic/manual/fixed | |
| Color/black and white | Automatic/color/black and white | |
| White balance | Automatic white balance/single press/user 1/ user 2 / manual/single press lock |
|
| Privacy protection | Switch, up to 15 areas | |
| Motion detecting | On/off | |
| Backlight compensation | High brightness compensation/backlight compensation/off | |
| RS-485 | Protocol/address/baud rate/data bit/parity bit/stop bit | |
| Flashing | Automatic/on/off | |
| language | Chinese/English/Japanese/German/French/Russian /Portuguese/Spanish |
|
| Feature set | Infrared optimization, digital noise reduction, brightness, contrast, sharpness, tone, color gain, digital anti-shake, digital amplification, flip, white point compensation, fog removal | |
| System Settings | Sync mode/lens/flip /LCD/CRT/ communication/camera identifier | |
| scenario | Automatic/indoor/outdoor/indoor backlight/intelligent traffic/custom | |
| General specification | Working temperature and humidity | - 10 ℃ ~ 60 ℃, humidity is less than 90% (without condensate) |
| Power supply | AC24V±10% / DC12V±10% | |
| coaxial visual control | Yes | |
| Power consumption | 4W MAX(4.5w MAX when ICR is switched) | |
| Communication | Coaxial visual control (with controller required) | |
| Protocol: Pelco - C (Coaxitron) | ||
| Weight | 4kg |