BIM-5001 ±15V current-limiting power supply Introduction: The BIM-5001 current-limiting power supply is primarily used for powering optical receivers and amplifiers, but it can also be used in general laboratories. Its two ±15V power output ports feature Pico micro connectors imported from Europe, which completely shield external noise sources to reduce interference with electrical signals. The three output ports are banana jacks for other laboratory equipment. All three output ports feature independent current limiting functions to prevent damage. If the load consumes current exceeding the specified limit, the voltage drop for that load will be rapid, reducing the available power and preventing damage to both the power supply and the connected equipment. Intended for optical receivers, amplifiers, and laboratory applications Features: 1 Compact shielded micro connector: This connector is of the compact Pico (m8) type, featuring a shielded design to reduce the coupling of electrical signals from external noise sources. 2. Independent current limiting function: All three outputs are independently current-limited to prevent damage to the power supply and connected devices. 3 types of cables are available: Pico (m8) double-ended and male-to-male cables of different lengths are provided to adapt to this power supply. Additionally, 1-meter-long cables from Pico (m8) male to banana head and BMC male to SMB plug are also available 4 Wide power input range: 100~240VAC, suitable for various countries and regions 5 is compatible with New Focus optical receivers Technical Specifications: Output voltage: ±15V±3% Ripple: < 1 mV(rms) Recovery time: < 100μs Temperature coefficient: < 300ppm/℃ Output current: <0.3A / <0.1A
BIM-5001 ±15V current-limiting power supply Introduction: The BIM-5001 current-limiting power supply is primarily used for powering optical receivers and amplifiers, but it can also be used in general laboratories. Its two ±15V power output ports feature Pico micro connectors imported from Europe, which completely shield external noise sources to reduce interference with electrical signals. The three output ports are banana jacks for other laboratory equipment. All three output ports feature independent current limiting functions to prevent damage. If the load consumes current exceeding the specified limit, the voltage drop for that load will be rapid, reducing the available power and preventing damage to both the power supply and the connected equipment. Intended for optical receivers, amplifiers, and laboratory applications
