AYAN-B220 thin film evaporator Introduction: Thin-film evaporator distillation is considered a gentle, safe, and effective separation method. It can be used for the concentration, purification, or separation of molecules with poor thermal stability, as well as related organic mixtures and compounds with low volatility, high boiling point, and high viscosity. Under high vacuum conditions, molecular distillation features low distillation temperature, short material heating time, and fast separation speed. It is widely used in petrochemical, pharmaceutical, essential oil purification, cosmetics perfume purification, and other fields. Features: Operating at a temperature far below the boiling point of the material, with short material residence time; conducive to the separation of high boiling point, heat-sensitive, and easily oxidizable materials 2. Effectively removing substances such as organic solvents and odors from liquids is a very effective method for desolventizing liquids after solvent extraction 3. It is possible to selectively distill the volatile products and remove other impurities. Through multistage separation, more than two substances can be simultaneously separated 4. The distillation has a high vacuum degree, with the vacuum level reaching below 0.1 Pa. A very high vacuum degree can be achieved inside. Typically, molecular distillation is operated under very low pressure, so the material is less prone to oxidation and damage 5. The distillation liquid film is thin, with high heat transfer efficiency, and the film thickness is less than 0.5mm 6. With a higher degree of separation, molecular distillation can separate substances that are conventionally difficult to separate 7. Without boiling and bubbling, molecular distillation is a free evaporation on the surface of the liquid layer, conducted under low pressure. There is no dissolved air in the liquid, so the entire liquid cannot be boiled during the distillation process, resulting in no bubbling phenomenon. 8. Multiple specifications are available for customers to choose from, suitable for small-scale and pilot-scale experiments. If larger evaporation area specifications are required, they can be customized according to customer requirements. 9. Physical separation method, non-toxic, harmless, pollution-free, and residue-free, can obtain pure and safe products Technical Specifications: Product model: AYAN-B220 Inner diameter (mm): 220 Evaporation area (㎡): 0.5 Condensation area (㎡): 0.65 Feeding capacity (L): 5 (customizable) Handling flow rate L/H: 2.0∽15.0 Motor power (W): 200 Maximum speed (r/min): 450 Light fraction collection bottle (L): 5 (customizable) Recombination collection bottle (L): 5 (customizable) Cold trap: Yes External condensation device: Yes Cooling device: Yes Vacuum degree (Pa): below 100 bar Heating temperature (°C): Room temperature - 200
AYAN-B220 thin film evaporator Introduction: Thin-film evaporator distillation is considered a gentle, safe, and effective separation method. It can be used for the concentration, purification, or separation of molecules with poor thermal stability, as well as related organic mixtures and compounds with low volatility, high boiling point, and high viscosity. Under high vacuum conditions, molecular distillation features low distillation temperature, short material heating time, and fast separation speed. It is widely used in petrochemical, pharmaceutical, essential oil purification, cosmetics perfume purification, and other fields.
