AUTO GBM-L1 Micro Leak Seal Tester Introduction: The AUTO GBM-L1 microleakage sealing tester utilizes the vacuum decay principle to conduct microleakage testing on finished product packaging. The tester is suitable for microleakage detection and integrity testing of various packaging containers. It can be applied to leak detection in pharmaceutical packaging such as vials, ampoules, HDPE bottles, prefilled syringes, food packaging, and chemical industry packaging. The sealing tester has the advantages of being non-destructive, non-invasive, and requiring no sample preparation. Features: 1. Dual-sensor dual-loop technology for non-destructive testing Based on dual-sensor and dual-loop system technology, high-quality absolute pressure sensors and differential pressure sensors achieve an accuracy of 0.1% FS, effectively detecting large and small leaks, accurately calculating the leak aperture, and providing judgments of qualified or unqualified. Non-destructive testing methods were employed to conduct leakage detection on finished product packaging, and the samples remained undamaged after testing. 2. The instrument has low sensitivity but excellent test repeatability For rigid samples, the detection sensitivity is as low as 2 μm, with excellent test repeatability, stable instrument performance, and low noise. 3. Brand accessories, excellent performance The branded vacuum pump boasts a pumping rate of 4 m3/h, a low noise level of 60 DB, high ultimate vacuum, and convenient oil level detection and replacement. 4. Large-sized touch screen, intelligent operation Color 7-inch touch screen, with clear view, sensitive touch, and easy operation. Equipped with a micro printer, USB data interface, and supports PC software for measurement and control operations. The testing software is designed in accordance with the GMP appendix "Computerized Systems", featuring audit tracking capabilities and multi-level user permission settings, which can meet the pharmaceutical industry's demand for data traceability. 5. Personalized customization to meet the needs of different samples For different testing samples, we support the customization of suitable testing chambers to meet various testing requirements. For samples of the same type, a customized nesting mode is supported, allowing multiple specifications of samples to share a single test chamber. Technical Specifications: Absolute pressure test range: (0~300) kPa Differential pressure test range: (-2~2) kPa Detection sensitivity: 1~2 μm Balance/test time: 1~3600 s Vacuum purging time: 1~3600s Set flow rate: 0~3 mL/min
AUTO GBM-L1 Micro Leak Seal Tester Introduction: The AUTO GBM-L1 microleakage sealing tester utilizes the vacuum decay principle to conduct microleakage testing on finished product packaging. The tester is suitable for microleakage detection and integrity testing of various packaging containers. It can be applied to leak detection in pharmaceutical packaging such as vials, ampoules, HDPE bottles, prefilled syringes, food packaging, and chemical industry packaging. The sealing tester has the advantages of being non-destructive, non-invasive, and requiring no sample preparation.
