Introduction: ATR9000 (formerly named ATP8200) is a mid-infrared attenuated total reflection spectrometer developed by our company. It has a built-in MEMS infrared modulated light source and uses a linear array of pyroelectric sensors to perform ATR spectrum measurement on extremely high-performance ZnSe window materials. Tiancheng specially customized the ultra-low noise signal processing circuit, which greatly reduced the noise of the sensor, obtained an excellent signal-to-noise ratio (about 2 times higher than similar competitors), and improved the measurement reliability of ATR9000, and the measurement results Does not change with ambient temperature. ATR9000 is suitable for measuring powder, liquid and other samples. The operation is very simple, and the test can be completed in just a few steps. typical application: food safety dye analysis material identification authentication and anti-counterfeiting oil analysis Drug, chemical, flammable and explosive analysis Technical Parameters: detector Type: Linear Pyroelectric Array Sensor Detection spectrum range: 0.1-100 μm Effective pixels: 256 pixels Pixel size: 50 μm x 417.5 μm or 60 μm x 500 μm Dynamic range: 75 dB Scanning speed: 10-1000 Hz Optical parameters Measuring wavelength range: 2.5-5 μm (4000-2000 cm-1) or 5.5-11 μm (1818-909 cm-1) ATR window material: ZnSe Optical resolution: 20 nm Signal to noise ratio: >300:1 Dynamic range: 75 dB Working temperature: -10-45 oC Working humidity: <90%RH no condensation Optical parameters Optical design: Linear Variable Filter (LVF) Light source type: Built-in MEMS electronically adjustable infrared light source Light source life: >5000 hours Electrical parameters Measuring time: 30 seconds (typical value) Data output interface: USB 2.0 ADC bit depth: 16 bit Power supply: 12 VDC Working current: <1 A Storage temperature: -20°C to +70°C Operating temperature: -10-45 oC Physical parameter Size: 195×128×50 mm3 Weight: 1.32 kg
Introduction: ATR9000 (formerly named ATP8200) is a mid-infrared attenuated total reflection spectrometer developed by our company. It has a built-in MEMS infrared modulated light source and uses a linear array of pyroelectric sensors to perform ATR spectrum measurement on extremely high-performance ZnSe window materials. Tiancheng specially customized the ultra-low noise signal processing circuit, which greatly reduced the noise of the sensor, obtained an excellent signal-to-noise ratio (about 2 times higher than similar competitors), and improved the measurement reliability of ATR9000, and the measurement results Does not change with ambient temperature. ATR9000 is suitable for measuring powder, liquid and other samples. The operation is very simple, and the test can be completed in just a few steps. typical application: food safety dye analysis material identification authentication and anti-counterfeiting oil analysis Drug, chemical, flammable and explosive analysis
