Introduction: Infrared micro-spectrometer with small structure size. It uses a 256-pixel pyroelectric wire array detector, an all-solid-state design, a highly reliable and reliable optical path and detector installation method, which improves the measurement reliability of the ATP8250. At the same time, Optian has specially customized the ultra-low noise CCD signal correlation double sampling processing circuit for ATP8250, which is the best level in the industry. ATP8250 can receive free-space light, and output the measured spectrum data through Type-C or UART port. ATP8250 only needs a 5V DC power supply, which can be directly supplied by USB, which is very easy to integrate and use. Features: 1. Spectral range: 2.5-5 μm or 5.5-11 μm 2. Ultra-low noise correlated double sampling circuit; 3. Spectral resolution: related to the width of the incident slit 4. Integration time: 100 us- 100ms 5. CCD parameters: 256×1 pixel, 50 x 400 μm 6. Power supply: DC 5V; 7. ADC bit depth: 16 bits; 8. ADC sampling rate: 1MHz; 9. Optical input interface: SMA905 optical fiber interface or free space input; 10. Data output interface: Type-C and UART; 11. 10-pin expansion interface typical application: Biomedicine: breathing gas, blood, urine analysis Process control: petrochemical, pharmaceutical Technical Parameters: Detector type: linear array pyroelectric sensor Full scale range: 75 dB Wavelength range: 2.5-5 μm or 5.5-11 μm Optical resolution: 30nm or 50nm Scanning speed: 10 ~ 1000 Hz Data output interface: USB 2.0 (Type-C) or UART ADC bit depth: 16 bit Power supply: DC 4.5 ~ 5.5 V (type @5V) Working current: 200mA @ Typical. Storage temperature: -30°C ~ +70°C Operating temperature: -25 ~ 50 °C Working humidity: <90%RH Size: 60×40×32mm Weight: 180 g
Introduction: Infrared micro-spectrometer with small structure size. It uses a 256-pixel pyroelectric wire array detector, an all-solid-state design, a highly reliable and reliable optical path and detector installation method, which improves the measurement reliability of the ATP8250. At the same time, Optian has specially customized the ultra-low noise CCD signal correlation double sampling processing circuit for ATP8250, which is the best level in the industry. ATP8250 can receive free-space light, and output the measured spectrum data through Type-C or UART port. ATP8250 only needs a 5V DC power supply, which can be directly supplied by USB, which is very easy to integrate and use.
