ATE2000 reagent-free full spectrum water quality monitor
Introduction: Full-spectrum water quality monitor is a new generation of environmentally friendly sensors. It is portable and economical to install. It can realize multi-parameter integration and real-time, automated, and portable water quality detection. The product adopts a rod-shaped structure and an open flow cell, equipped with an automatic cleaning device, which can be directly immersed in water to achieve in-situ online detection of water quality. There are no chemical reagents in the test process, less maintenance work and long instrument life. The instrument has data storage and wireless transmission functions, using RS485 interface and Modbus protocol, low power consumption. There are 2 analog signal output ports (4-20mA) and USB interface, and relays can trigger alarms or control external devices. Get rid of the shortcomings of traditional reagent photoelectric colorimetric instruments, such as regular replacement of reagents, secondary pollution, long measurement time, high failure rate, and need to build station buildings. Features: 1. Based on the full spectrum absorption method, no chemical reagents and no secondary pollution 2. Quick measurement, only a few seconds 3. No need for sampling and pretreatment 4. Automatic air cleaning, low maintenance; 5. Double beam measurement, even for long-term monitoring, there is the best stability 6. Adopt advanced artificial intelligence algorithm to automatically compensate for turbidity interference 7. RS485 signal output, strong anti-interference ability, transmission distance up to 1000 meters 8. Can quickly download data through U disk 9. The relay interface is reserved for secondary development by customers 10. Optical window with nano coating, free of adhesion 11. Low maintenance and low operating cost typical application: Sewage treatment plant; environmental monitoring; water quality monitoring of natural water bodies such as rivers, lakes and reservoirs; water quality monitoring of aquaculture; industrial production process control; surface water trend analysis; water quality early warning system Technical Parameters: sensor Measuring principle: UV visible light 200-720nm continuous spectrum Measurement parameters: COD, turbidity Light source: Hamamatsu xenon lamp with a theoretical life of more than 10 years Measuring optical path (optical path between 1-35mm is optional): 1/5/10/35mm Measurement period: 1-600min (can be set) Measuring range (range can be customized): 10-150mg/L COD (optical path 10mm) 10-100NTU turbidity (optical path 10mm) Measurement accuracy: ±5% ±5% Repeatability: 5% 5% Zero drift: ±2% ±2% Range drift: ±2% ±2% Compensation function: double beam automatic compensation, turbidity compensation Automatic cleaning: The probe is equipped with automatic cleaning, maintenance-free (with air compressor and solenoid valve) Shell material: stainless steel or titanium (choose according to water quality and customer requirements) Dimensions: 600mm*136mm Weight: 12kg Power supply mode: 12VDC Communication method: RS485 Power consumption: 12W Calibration: factory calibration/on-site calibration (according to accuracy and customer requirements) Protection level: IP68 Installation methods: various installation methods such as immersion, extraction bypass installation, etc. (according to customer requirements) Storage temperature: -20-40℃
Controller Display: 11.6’’ large-screen high-definition touch LCD display Communication output: NB-loT, WIFI, 4G Data storage: 32GB Protection level: IP65 Sensor interface: 1 M12 industrial interface for connecting sensors USB interface: Yes Analog output: 4 4-20mA output Relay control: 4 channels 24V 1A relay high and low point control Power supply mode: 220±10%VAC; 50-60HZ Cable length: standard 10 meters, can be customized Storage temperature: -20-40℃
Introduction: Full-spectrum water quality monitor is a new generation of environmentally friendly sensors. It is portable and economical to install. It can realize multi-parameter integration and real-time, automated, and portable water quality detection. The product adopts a rod-shaped structure and an open flow cell, equipped with an automatic cleaning device, which can be directly immersed in water to achieve in-situ online detection of water quality. There are no chemical reagents in the test process, less maintenance work and long instrument life. The instrument has data storage and wireless transmission functions, using RS485 interface and Modbus protocol, low power consumption. There are 2 analog signal output ports (4-20mA) and USB interface, and relays can trigger alarms or control external devices. Get rid of the shortcomings of traditional reagent photoelectric colorimetric instruments, such as regular replacement of reagents, secondary pollution, long measurement time, high failure rate, and need to build station buildings.
