Position: Home > > Analytical instruments > Chromatography Equipment > Thermal analysis / thermal desorption > ATDS-20A Fully Automatic Thermal Desorption System

ATDS-20A Fully Automatic Thermal Desorption System

Product ID:FSre006

Price: Please inquire PDF Format
Supply Ability:50SETS/MON
Port:SHENZHEN
  • Product Introduction
  • Other information
  • Model NumberATDS-20A
    Brand NameZHONGYIYUSHENG
    Payment TermsTT,PAYPAL,Alibaba.com Pay
    ATDS-20A Fully Automatic Thermal Desorption System
    Product Introduction
    The ATDS-20A Fully Automatic Thermal Desorption System is a new-generation automatic thermal desorption unit independently developed for high-throughput sample preparation in gas chromatography (GC) analysis. Designed with full automation, a touchscreen interface, and intelligent workflow control, the ATDS-20A enables continuous operation of up to 20 samples without operator supervision.
    The system is fully compatible with both imported and domestic gas chromatographs (GC), making it a flexible and powerful solution for VOC analysis, environmental monitoring, forensic testing, and industrial air sampling. Optional secondary desorption modules (ambient or low-temperature) further expand its analytical capabilities.

     
    Key Features of ATDS-20A Thermal Desorption System
       • Fully automatic operation for up to 20 samples continuous processing
       • Intelligent self-check on startup with fault alarm and system diagnostics
       • Automatic sample tray positioning for precise workflow control
       • External carrier gas system; no modification required for GC instruments
       • Programmable multi-step operation: desorption, purge, re-desorption, injection, backflush cleaning
       • Advanced electronic cooling system (no liquid nitrogen required)
       • Sharp chromatographic peaks ensured by two-stage thermal desorption design
       • Anti-contamination design with automatic backflushing of transfer lines and injection valve
       • Universal GC interface compatible with all major international GC brands
       • Optional flexible quartz transfer tube for reactive or active compounds
       • Easily replaceable injection needle compatible with all GC inlet systems
     
    Working Principle
    The ATDS-20A automatic thermal desorption system works by collecting volatile and semi-volatile organic compounds (VOCs/SVOCs) from sample tubes and releasing them through a controlled thermal process into a gas chromatograph.

       • Primary Desorption: Sample is heated (up to 400°C) to release analytes.
       • Cold Trap Focusing: Compounds are concentrated at low temperature (-30°C to 50°C) using electronic cooling.
       • Secondary Desorption: Rapid heating (>2000°C/min) injects analytes into GC column.
       • GC Analysis: Separated compounds are analyzed by GC detector.
    This dual-stage process ensures high sensitivity, narrow peak shape, and excellent reproducibility.
     
    Technical Specifications
    Parameter Specification
    Desorption Temperature 1 RT to 400°C (±1°C step)
    Desorption Temperature 2 RT to 400°C (heating rate >2000°C/min)
    Valve Injection System Temperature RT to 220°C
    Sample Transfer Line Temperature RT to 260°C
    Cold Trap Temperature -30°C to 50°C (electronic cooling, no LN₂ required)
    Temperature Accuracy < ±0.1°C
    Temperature Gradient < ±0.1°C
    Sample Capacity 20 positions
    Desorption Recovery Rate >98% (compound dependent)
    Backflush Flow Rate 0–600 mL/min (adjustable)
    Simulated Sampling Flow Rate 100 mL/min
    Instrument Size 450 × 360 × 510 mm
    Weight ~30 kg
     
    Applications of ATDS-20A Automatic Thermal Desorber
    The ATDS-20A is widely used in analytical laboratories and industrial testing environments, including:

       • VOC (Volatile Organic Compounds) analysis
       • Indoor and ambient air quality monitoring
       • Environmental pollution testing
       • Petrochemical and refinery emissions analysis
       • Food packaging migration testing
       • Forensic and toxicology trace analysis
       • Occupational health and safety monitoring
       • Material emission testing (plastics, coatings, rubber)
     
    Performance Comparison Table
    Feature ATDS-20A Fully Automatic TD System Conventional Thermal Desorber
    Sample Capacity 20 samples automatic 1–10 samples, often manual
    Operation Mode Fully automatic, unattended Semi-automatic/manual
    Cooling System Electronic cooling (-30°C) Liquid nitrogen required
    Peak Shape Quality Narrow, high resolution Broader peaks
    Contamination Control Automatic backflush system Limited or manual cleaning
    GC Compatibility Universal (all GC types) Often limited
    Workflow Efficiency High-throughput continuous Low to medium throughput
    Recovery Rate >98% 85–95%
     
    Why Choose ATDS-20A Thermal Desorption System?
    Compared with traditional thermal desorption instruments, the ATDS-20A automatic thermal desorption system delivers higher efficiency, better reproducibility, and significantly lower operational cost. The elimination of liquid nitrogen cooling and full automation make it especially suitable for laboratories requiring high-throughput VOC analysis and continuous operation.

     
    Frequently Asked Questions (FAQ)
    Q1: What GC systems is the ATDS-20A compatible with?
    A: The ATDS-20A is compatible with all major domestic and imported gas chromatographs without modification.
    Q2: Does the system require liquid nitrogen?
    A: No. It uses an advanced electronic cooling system, eliminating the need for liquid nitrogen.
    Q3: How many samples can be processed automatically?
    A: It supports continuous automatic processing of up to 20 samples.
    Q4: What types of compounds can be analyzed?
    A: It is suitable for VOCs and semi-VOCs in air, environmental, and industrial samples.
    Q5: Can it prevent cross-contamination between samples?
    A: Yes. Automatic backflush cleaning of transfer lines and injection system minimizes cross-contamination.
    Q6: Is the system suitable for trace analysis?
    A: Yes. The dual-stage desorption and cold trap focusing provide high sensitivity for trace-level detection.

     

     
  • Frequently Asked Questions (FAQ)
    Q1: What GC systems is the ATDS-20A compatible with?
    A: The ATDS-20A is compatible with all major domestic and imported gas chromatographs without modification.
    Q2: Does the system require liquid nitrogen?
    A: No. It uses an advanced electronic cooling system, eliminating the need for liquid nitrogen.
    Q3: How many samples can be processed automatically?
    A: It supports continuous automatic processing of up to 20 samples.
    Q4: What types of compounds can be analyzed?
    A: It is suitable for VOCs and semi-VOCs in air, environmental, and industrial samples.
    Q5: Can it prevent cross-contamination between samples?
    A: Yes. Automatic backflush cleaning of transfer lines and injection system minimizes cross-contamination.
    Q6: Is the system suitable for trace analysis?
    A: Yes. The dual-stage desorption and cold trap focusing provide high sensitivity for trace-level detection.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com