ASD106 mining intrinsically safe personal sound exposure meter Features: 1. Personal noise dosimeter 2. Pocket-sized fully digital sound level meter 3. Octave and one-third octave analyzers (optional) 4. Time-weighted average sound level meter 5. It is suitable for noise measurement in workplaces and occupational health noise assessment, as well as for the measurement and analysis of environmental noise and machine noise 6. Mine-used Intrinsic Safety Explosion-proof Certificate No.: CQEx21.2367 7. Safety Mark Certificate Number for Coal Mine Products: MFA220172 8. Safety Mark Certificate Number for Metal and Non-Metallic Mining Products: KFA220076 Technical Specifications: 1. Performance level: Equivalent to a Class 2 sound level meter that meets the requirements of GB/T 3785.1-2023. 2. Measured and evaluated parameters: LP, Leq, LE, Leq,1s, L5, L10, L50, L90, L95, Lmax, Lmin, LCpeak, Leq8h, Dose, EA, SD, NLpeak, Lav, TWA, Dnee, Enee, LEnee, etc. 3. Microphone: HY205 Type 2-level engineering measurement microphone, with a nominal diameter of 12.7 mm and a free-field frequency response. The nominal sound pressure sensitivity is 40 mV/Pa (nominal sound pressure sensitivity level is -28 dB, with a reference value of 1 V). When calibrated with a sound calibrator, the self-sound field correction value is 0.2 dB at a calibration frequency of 1 kHz. 4. Frequency range: 20 Hz to 12.5 kHz. 5. Frequency weighting: A-weighting, C-weighting, Z-weighting. 6. Time weighting: F (fast response), S (slow response), I (impulse response). 7. Measurement range: A-weighted sound pressure level: 30 dB to 130 dB; C-weighted sound pressure level: 40 dB to 130 dB; Z-weighted sound pressure level: 45 dB to 130 dB. 8. Sampling frequency: 48 kHz. 9. Display: 0.96-inch OLED display with a resolution of 128×64 and a resolution power of 0.1dB, featuring indicators for overload, out-of-range, and low battery voltage alarms. 10. Power Supply: Equipped with a 3.7 V lithium battery, it can operate continuously for at least 25 hours under reference environmental conditions. 11. Instrument power: not exceeding 0.5W. 12. Overall dimensions: length × width × thickness 105 mm × 52 mm × 33 mm. 13. Weight: 220 g. 14. Shell material: PC flame-retardant and anti-static material. 15. Operating temperature range: 0℃~40℃.
ASD106 mining intrinsically safe personal sound exposure meter Features: 1. Personal noise dosimeter 2. Pocket-sized fully digital sound level meter 3. Octave and one-third octave analyzers (optional) 4. Time-weighted average sound level meter 5. It is suitable for noise measurement in workplaces and occupational health noise assessment, as well as for the measurement and analysis of environmental noise and machine noise 6. Mine-used Intrinsic Safety Explosion-proof Certificate No.: CQEx21.2367 7. Safety Mark Certificate Number for Coal Mine Products: MFA220172 8. Safety Mark Certificate Number for Metal and Non-Metallic Mining Products: KFA220076