5LB air generator Introduction: The maintenance free 5LB air generator uses a low-noise compressor as the air source; The instrument is equipped with a two-stage voltage regulator and electronic refrigeration. The purification system consists of three stages of purification, including filters, activated carbon, and molecular sieves, which can effectively remove impurities and water molecules from the air. Can be used for various models of gas chromatographs and flame photometers both domestically and internationally, and can replace steel cylinders to make your work more convenient. characteristic: 1. It can replace traditional high-pressure air bottles and make laboratories instrument. 2. Easy to operate, just turn on the power switch to produce gas, can be used continuously or intermittently. 3. The gas path system is set to four levels of purification, 4. There are two levels of voltage regulation to improve the accuracy of voltage regulation. 5. Equipped with overvoltage protection. 6. Equipped with automatic drainage system, it is safer and more convenient to use 7. Equipped with normal pressure start-up, it can extend the service life. 8. Stainless steel gas storage tank. 9. The output is equipped with semiconductor cold drying, which can effectively ensure gas cleanliness without the need to replace desiccants. Technical parameters: Power supply voltage: 220V 50Hz Environmental temperature: 15-40C ° C Relative humidity ≤ 70%, without significant dust and corrosive gas pollution. Air purity: oil-free fourth level purification Output flow rate: 0-5L/min Output pressure: A outputs 0-0.4Mpa; B output 0-0.5Mpa Noise: ≤ 42 decibels Rated power: 185W Dimensions: 465 × 235 × 360mm (L × W × H); Weight: Approximately 24Kg;
Introduction: The maintenance free 5LB air generator uses a low-noise compressor as the air source; The instrument is equipped with a two-stage voltage regulator and electronic refrigeration. The purification system consists of three stages of purification, including filters, activated carbon, and molecular sieves, which can effectively remove impurities and water molecules from the air. Can be used for various models of gas chromatographs and flame photometers both domestically and internationally, and can replace steel cylinders to make your work more convenient.