5E-MVC6700 Automatic Volatile Matter Tester Introduction: This product is mainly suitable for testing the total moisture or analyzing the moisture content of coal, coke, biomass fuel and other samples. It can be widely used in industries such as electricity, coal, metallurgy, chemical engineering, building materials, testing, geology, and scientific research institutions. Applicable standard: GB/T 211-2017 "Method for determination of total moisture in coal" GB/T 212-2008 "Industrial analysis method of coal" DL/T 2029-2019 "Automatic Instrumental Method for Determination of Total Moisture in Coal". Features: 1. Adopting the classic electric blast heating method and capable of introducing nitrogen gas, the testing process complies with national standards and CNAS laboratory accreditation requirements, and the test results are accurate and reliable, which can be used as a basis for settlement. 2. It can complete the total moisture or analytical moisture testing of 22 (5E-MW6522) or 36 (5E-MW6536) samples at once, with a significant advantage in testing efficiency. 3. It can achieve functions such as automatic weighing, automatic temperature control, automatic control of testing atmosphere, inspection experiments, and automatic calculation of results. After the operator puts in the sample, the entire testing process can be automatically completed. 4. Built in 0.1mg high-precision electronic balance, with two weighing modes available: single weighing or batch weighing. It also has an external LCD display screen that displays the current crucible number and balance reading in real time, achieving precise control of sample weight. 5. The furnace design is compact, with a ventilation rate better than the national standard requirements (more than 15 times per hour), and effectively saves nitrogen consumption, which can meet the testing requirements of lignite or other special samples. 6. The furnace is made of high-quality mirror stainless steel material, which has excellent heat resistance and heat reflection performance, and good temperature uniformity. 7. Adopting advanced PID temperature control algorithm, the heating speed is fast, the temperature control accuracy is high, and the external LCD screen can display the real-time temperature inside the furnace. 8. Adopting an upward opening furnace door design, the furnace door can automatically open and close, and can manually control the rotation of the sample plate, making the operator's layout operation convenient and fast. 9. Equipped with power-off memory function, the test data will not be lost during the analysis process when the power is cut off, and the test can continue after power on. 10. The testing software can achieve login permission management, record all experimental process information, and transmit test data online. Technical Specifications: Product model: 5E-MW6522 Sample quantity: 22 per batch Suitable coal types: bituminous coal, anthracite coal, brown coal Testing methods: air drying method, nitrogen drying method Adaptation sample: ≤ 6mm full moisture sample (10-12) g ≤ 0.2mm analysis of water sample (0.9-1.1) g Testing time: Rapid method: Approximately 1 hour per experiment (depending on the specific sample situation) Classic method: Each experiment takes about 2 hours (depending on the specific sample situation) Maximum temperature: 200 ℃ Temperature control accuracy: ± 2 ℃ Working power supply: AC220V ± 10%, 50Hz ± 1Hz Maximum power: ≤ 3kW Weight: 100kg Dimensions: 720 × 650 × 500 (mm)
Introduction: This product is mainly suitable for testing the total moisture or analyzing the moisture content of coal, coke, biomass fuel and other samples. It can be widely used in industries such as electricity, coal, metallurgy, chemical engineering, building materials, testing, geology, and scientific research institutions. Applicable standard: GB/T 211-2017 "Method for determination of total moisture in coal" GB/T 212-2008 "Industrial analysis method of coal" DL/T 2029-2019 "Automatic Instrumental Method for Determination of Total Moisture in Coal".
