Introduction: For uniform extrusion in the laboratory to remove excess moisture on the fabric. Fully simulated pad dyeing process at the scene, with compressed air to promote the cylinder. High-power standard cylinder, anti-rail friction, no left and right deviation, high reproducibility. Pressurized air to promote the film, so that the pressure is uniform, and after prolonged use, pressure pick up good reproducibility. The current hardness of 70 degrees, pressure absorption rate between 20% -110% for a wide range of cloth species, a wide range of applications. Once fixed, there is a stable rate of pressure absorption, without the hassle of time-consuming adjustments and changes. Comprehensive safety equipment: a safety bar and emergency touch switch and hidden knee plate, touch, automatically stop the motor, and open the roller, the operator is absolutely safe. Specially designed feeding device is efficient and safe without pinching your fingers. In addition to the main frame, the other is made of stainless steel, there is no problem of chemical corrosion. Technical Parameters Model: LP vertical Roll width: 400mm Roll diameter: 130mm Pressure control: 0.03 ~ 0.8Mpa Cloth speed: 0 ~ 10m / min, (frequency control can be positive and negative) Overall dimensions: 920 × 620 × 1080mm (L × W × H) Power: AC220V or 380V, 250W
