WG75 paper gloss meter Introduction: WG75 paper gloss meter meets the national metrological verification standard JJG 696 first-grade gloss meter standard. It is suitable for measuring the specular gloss value of paper surface such as coated paper and coated paper. The 75-degree gloss measurement method is mainly applied to coated paper and paperboard, and can also be used for uncoated paper and paper or low-print gloss paper and paperboard printing. The difference in color and diffuse reflectance of the sample is for measuring gloss. Has little effect. Features: 1, 75 ° coated paper and cardboard. 2, the operation is simple and more accurate. 3, built-in calibration version boot automatic calibration. 4, external dry battery, with an external rechargeable power supply. 5, small and portable, the measurement is simpler. 6, long-life light source, good stability, that is, open and test. Technical Parameters: Model: WG75 Range: 0-1000Gu Measuring range: Suitable for measuring the specular gloss value of paper on coated paper, coated paper, etc. Size: 122x34x60mm Projection angle: 75° Measuring spot: (ellipse: long axis * short axis) 9mm X 15mm Measurement mode: Automatic measurement, manual measurement, single measurement, average measurement, and cross-setting for measurement, providing multiple combinations of measurement modes. Data storage: 100 groups. Any data stored can be set as a standard, custom tolerance range Language: Chinese/English Output: Connect to a micro printer for real-time output of measurement data Measurement time: 0.4S Graduation value: 0.1Gu Repeatability: 0.2Gu Reproducibility: 0.4Gu Indication error: 1.0Gu International standards: ISO-2813, ASTM-C584, ASTM-D523, DIN-67530, ASTM-D2457, JND-A60, JND-P60 Domestic standards: GB 9754, GB 9966, GB 8807 Standard accessories: 2 section 5 alkaline batteries, power adapter, manual, warranty card certificate, calibration plate, gloss software GlossW Optional accessories: Micro printer
Introduction: WG75 paper gloss meter meets the national metrological verification standard JJG 696 first-grade gloss meter standard. It is suitable for measuring the specular gloss value of paper surface such as coated paper and coated paper. The 75-degree gloss measurement method is mainly applied to coated paper and paperboard, and can also be used for uncoated paper and paper or low-print gloss paper and paperboard printing. The difference in color and diffuse reflectance of the sample is for measuring gloss. Has little effect.
