Introduction: The UNIPOL-830 metallographic grinding and polishing machine is mainly used for grinding and polishing metallographic specimens. It can also be used for grinding and polishing ceramics, glass, PCB, plastic and other materials. This machine can choose to use pressure ring mounted card or magnetic adsorption method to place sandpaper and polishing pad, the work is more stable. Magnetic adsorption is mainly used to overcome the shortcomings of pleating of traditional carded polishing fabrics. The polishing fabric with pressure-sensitive adhesive is affixed to the polishing film and then adsorbed on the magnetic film. Second, the replacement of sandpaper and polishing pad is more convenient. Technical Parameters Power supply: 110V/220V Grinding disc rotation speed: 50rpm-600rpm Polishing disc: Ø203mm Size: 580mm × 420mm × 350mm; Weight: 24kg Installation conditions This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1. Water: The equipment is equipped with a water inlet and a water outlet, and it needs to connect tap water and drainage 2, electricity: AC220V 50Hz, must have a good ground 3, gas: no 4、Workbench: size 800mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: no Standard accessories Magnetic plate: 2 pieces Grinding film: 5 tablets Sandpaper (240#, 400#, 800#, 1500#): 2 pieces each Polishing Pads (Matte, Synthetic): 1 each Diamond polishing paste (W2.5): 1 Optional accessories 1, electroplated diamond abrasive sheet 2, magnetic resin diamond grinding and polishing plate
Introduction: The UNIPOL-830 metallographic grinding and polishing machine is mainly used for grinding and polishing metallographic specimens. It can also be used for grinding and polishing ceramics, glass, PCB, plastic and other materials. This machine can choose to use pressure ring mounted card or magnetic adsorption method to place sandpaper and polishing pad, the work is more stable. Magnetic adsorption is mainly used to overcome the shortcomings of pleating of traditional carded polishing fabrics. The polishing fabric with pressure-sensitive adhesive is affixed to the polishing film and then adsorbed on the magnetic film. Second, the replacement of sandpaper and polishing pad is more convenient.
