Position: Home > > Industrial on-line and process control > Flow / leak > Flow rate monitor > TY-60KS Coriolis mass flowmeter for flue gas

TY-60KS Coriolis mass flowmeter for flue gas

Product ID:LLCL013

US$0.00 ~ US$1.00 PDF Format
Supply Ability:200 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberTY-60KS
    Brand NameDALIANTIANYANG
    Payment TermsTT,PAYPAL
    TY-60KS Coriolis mass flowmeter
     
    Introduction:
    Coriolis force mass flowmeter is a mass flow meter for the purpose of mass flow measurement using the modulation effect of the fluid mass flow on the vibration of the vibrating tube, that is, the Coriolis force phenomenon.
    Flow meters are generally composed of sensors and transmitters. This product uses the temperature field change generated when the fluid flows through the pipe heated by the external heat source to measure the fluid mass flow,
    Or a flow meter that measures the mass flow of the fluid by using the relationship between the energy required for the fluid temperature to rise by a certain value and the fluid mass when the fluid is heated. no pressure,
    Temperature compensation can easily detect natural gas, air, hydrogen, oxygen, chlorine, ammonia, argon, ammonia, biogas, coal gas, flue gas flowing in the pipeline
    and (except acetylene gas) and other gases mass flow.
    Features:
    1. Measure gas mass flow without temperature and pressure compensation.
    2. Large turndown ratio, measuring flow rate range: 0.1Nm/s~120Nm/s.
    3. No pressure loss, suitable for pipes of any shape with known cross-sectional area.
    4. Corrosion-resistant sensor, suitable for measuring corrosive gases.
    5. The plug-in sensor can be installed and maintained online.
    6. The expert algorithm of the full range ensures the accuracy of the measurement. Suitable for trade settlement or gas leak detection.
    technical parameter:
    Measuring velocity range: 0.1m/s120m/s.
    Measurement accuracy: ±1% (relative error), ±0.5% FS
    Repeatability: better than 0.25%
    Sensor form: plug-in, pipe segment
    Pipe diameter: DN50-DN9000 (insertion type); DN15-DN9000 (pipe segment type)
    Measuring medium: various single-component or multi-component gases (except acetylene gas)
    Medium temperature: -40~+350
    Working pressure: 6.0MPa
    Power supply: AC110 ~ 220V or DC24V 1A
    Response speed: 1S
    Signal output: 4-20mA, RS485 output optional (protocol type MODBUS)
    Measurement display: mass flowmeter (Kg/h), standard volume flowmeter (Nm3/h), cumulative flowmeter, medium temperature ()
    Sensor protection class: IP68
    Converter protection grade: integrated IP67, split wall-mounted IP65, split climbing type IP52
    Explosion-proof grade: ExdIICT4
  • Introduction:
    Coriolis force mass flowmeter is a mass flow meter for the purpose of mass flow measurement using the modulation effect of the fluid mass flow on the vibration of the vibrating tube, that is, the Coriolis force phenomenon.
    Flow meters are generally composed of sensors and transmitters. This product uses the temperature field change generated when the fluid flows through the pipe heated by the external heat source to measure the fluid mass flow,
    Or a flow meter that measures the mass flow of the fluid by using the relationship between the energy required for the fluid temperature to rise by a certain value and the fluid mass when the fluid is heated. no pressure,
    Temperature compensation can easily detect natural gas, air, hydrogen, oxygen, chlorine, ammonia, argon, ammonia, biogas, coal gas, flue gas flowing in the pipeline
    and (except acetylene gas) and other gases mass flow.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com