Position: Home > > Life science instrument and equipment > Biological engineering equipment > Filtration system > TQC500 cutting fluid filtration system

TQC500 cutting fluid filtration system

Product ID:SHGCglxt038

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberTQC500
    Brand NameWHTLRHBKJ
    Payment TermsT/T, paypal
    Brief introduction:
    It is mainly used in the metal processing and manufacturing industries such as cooling fluid, cutting fluid, grinding fluid, cleaning agent and industrial waste water. For in the course of using the cutting fluid in fusel oil, the oil, stink, common problems such as short service life, the biggest advantages of this equipment such as completely discard bad cutting fluid, if because of environmental pressure to reduce emissions, water can be produced simply switch valve, water directly against the cutting fluid concentrate can reuse again. It can effectively reduce the discharge of waste liquid, which brings the most direct cost savings to your company.
    Features:
    1. Remove oil slick
    2. Filter impurities
    3. Deodorization, sterilization and disinfection
    4. Extend the working period of cutting fluid
    5. Improve the cleaning degree of cutting fluid
    6. Reduce knife damage and improve product quality
    7. Clean the cutting fluid into clean water, which can be mixed again
    8. Realize zero emission of cutting fluid in the factory and reduce pressure of environmental protection
    Technical parameters:
    Traffic: 200-500L/H
    Total power (KW) : 1.5kw
    Working oil temperature: 10 ~ 60
    Air source pressure: run > 0.2mpa
    PH online monitoring: detection range 4-14
    Size (W*L*H) : 800*1500*1300
    Power supply: 380 v / 50HZ
    Noise: 60 db or less
    Inlet pipe diameter: DN20mm
     
  • Brief introduction:
    It is mainly used in the metal processing and manufacturing industries such as cooling fluid, cutting fluid, grinding fluid, cleaning agent and industrial waste water. For in the course of using the cutting fluid in fusel oil, the oil, stink, common problems such as short service life, the biggest advantages of this equipment such as completely discard bad cutting fluid, if because of environmental pressure to reduce emissions, water can be produced simply switch valve, water directly against the cutting fluid concentrate can reuse again. It can effectively reduce the discharge of waste liquid, which brings the most direct cost savings to your company.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com