ST-1548 copper sheet corrosion tester Introduction
The ST-1548 copper sheet corrosion tester conforms to GB / T5096 and ASTM D130 standards, and is suitable for measuring the degree of copper sheet corrosion caused by gasoline, jet fuel, hydrocarbons, solvent oils, lubricants and other petroleum products. The instrument has functions such as temperature control, automatic timing and on-time alarm. It is widely used in petroleum, chemical industry, electric power, commodity inspection, universities, scientific research and other departments. Features
1.LCD temperature controller, heater, electric mixer
2. 4 sample experimental holes
3.Time of copper corrosion test can be set and alarmed
4.PID temperature control technology Technical Parameters
Applicable standards: GB / T5096, ASTM D130
Temperature control range: arbitrarily set from room temperature to 100 ℃
Temperature control accuracy: ± 1 ℃
Temperature control heating power: 600W
Auxiliary heating power: 1000W
Time control range: 1 minute to 24 hours
Sheng sample holes: 4
Number of measurement samples: 4 to 12
Overall power consumption: ≤1800W
Ambient temperature: 5 ℃ ～ 45 ℃
Relative humidity: 10% ～ 80% Rh
Power supply voltage: 220V ± 10%, 50Hz
Size: 442mm * 335mm * 565mm
Introduction
The ST-1548 copper sheet corrosion tester conforms to GB / T5096 and ASTM D130 standards, and is suitable for measuring the degree of copper sheet corrosion caused by gasoline, jet fuel, hydrocarbons, solvent oils, lubricants and other petroleum products. The instrument has functions such as temperature control, automatic timing and on-time alarm. It is widely used in petroleum, chemical industry, electric power, commodity inspection, universities, scientific research and other departments.
