Brief introduction: Products adopt can simulate full sunlight spectrum xenon arc lamp to reproduce the destructive waves of light of different environment, for scientific research, product development and quality control to provide the corresponding environmental simulation and acceleration. Products can be used for the selection of new materials, the improvement of existing materials or evaluate material composition change after the change of the durability test, can be a good simulation under different environmental conditions, materials exposed to changes in the sun. Technical parameters: Temperature range: RT + 10 ℃ ~ 80 ℃; The board temperature: 63 ℃ + 3 ℃; Temperature fluctuation degree, plus or minus 0.5 ℃ or less; Temperature uniformity: plus or minus 2.0 ℃ or less; Humidity range 65 ~ 98% R? H; Rainfall time: 1 ~ 9999 minutes, adjustable; Rain cycle: 0 ~ 240 min, interval (break) rainfall is adjustable; Water cycle (time/time of spray water) : 18 min / 102 min. In the rain water pressure: 0.12 ~ 0.15 Mpa; Spray nozzle aperture: Ф 0.8 mm; Xenon lamp power: 1.8 KW/branch; Heating power: 2 kw; Rack and light distance: 230 ~ 280 mm; Wavelength: 290 ~ 800 nm; Adjustable light cycle, time: 1 ~ 999 h, m, s irradiance for 50-100 w / ㎡; Power requirements: AC220V (plus or minus 10%) V / 50 hz two phase three-wire system;
Brief introduction: Products adopt can simulate full sunlight spectrum xenon arc lamp to reproduce the destructive waves of light of different environment, for scientific research, product development and quality control to provide the corresponding environmental simulation and acceleration.
